French Version

Eight-Port 6Gb/s PCI Express SATA+SAS RAID Controller

LSI 6Gb/s MegaRAID SATA+SAS controllers, together with CacheVault flash technology, virtually eliminate hardware maintenance associated with Lithium-ION batteries, lower total cost of ownership over the life of the controller card, and provide more environmentally friendly cache protection, all while maintaining optimal RAID performance.

LSI and Seneca Data improve performance and reduce costs with a multi-petabyte archive storage solution

MegaRAID Interoperability Matrix

French Version

US Version

Solutions de stockage Guide de produits

Adaptateur de stockage Guide de s¨¦lection des produits

Storage Adapter Product Selector Guide

Storage Solutions Product Guide 2012

The LSI MegaRAID LSIiBBU09 product is an intelligent battery backup unit (iBBU) based on Lithium ion (LiON) battery cell technology. The LSIiBBU09 unit protects the integrity of the cached data on a MegaRAID RAID controller for up to 48 hours in case of a complete AC power failure or a brief power outage. You can connect the LSIiBBU09 unit either directly or remotely to your RAID controller, depending on which RAID controller you have. LSI provides a family of MegaRAID iBBUs for use with its high-performance MegaRAID RAID controllers. The LSI MegaRAID iBBUs provide an inexpensive alternative to using an uninterruptible power supply (UPS) and a second level of fault tolerance when used with a UPS.

This guide describes the MegaRAID SAS 9266-4i RAID controller, the MegaRAID SAS 9266-8i RAID controller, and the related components (sold separately), which include the LSICVM01 CacheVault Kit and the intelligent Battery Backup Unit 09 (LSIiBBU09). The MegaRAID SAS 9266-8i RAID controller is a PCI Express, low-profile RAID controller that offers a 6-Gb/s transfer rate, and controls eight internal SAS+SATA ports through two SFF-8087 mini SAS 4i internal connectors. The MegaRAID SAS 9266-4i RAID controller is a PCI Express, low-profile RAID controller that offers a 6-Gb/s transfer rate, and controls four internal SAS+SATA ports through one SFF-8087 mini SAS 4i internal connectors. You can connect the CacheVault Flash Module 02 (CVFM02) directly to your MegaRAID 9266 RAID controller, or the LSIiBBU09 unit either directly or remotely to RAID controller. These products provide data protection in case of loss of power or server failure.

Voyez comment les disques SSD Hitachi connectés aux contrôleurs LSI MegaRAID apportent une accélération sans compromis aux solutions à faible latence et contribuent à réduire les coûts d'exploitation et les frais d'investissement.

Learn how shared storage workflows built on EditStor ES with LSI® MegaRAID® SAS controller, are designed to provide easier and more affordable media sharing for creative professionals

Découvrez pourquoi les flux de travaux de stockage partagé construits à partir d'EditStor ES, doté du contrôleur SAS LSI® MegaRAID®, sont conçus pour rendre le partage de contenu multimédia plus facile et plus abordable aux professionnels de la création.

Learn how Hitachi SSDs connected to LSI MegaRAID controllers deliver uncompromised acceleration to low latency solutions, and help drive down operating costs and capital expenditures.

FR version

Hardware RAID is data protection and application acceleration technology delivered on PCI Express based option cards with related firmware, drivers, utilities and management software. Enterprise hardware RAID cards have onboard capabilities to perform parity generation and RAID recovery operations, as well as data, memory and bus management. Software RAID, a subset of the features delivered in hardware RAID, is usually delivered as part of an operating system and relies on system resources, processors, and memory.

The MegaRAID SAS Software User Guide documents the utilities used to configure, monitor, and maintain MegaRAID Serial-attached SCSI (SAS) RAID controllers with RAID control capabilities and the storage-related devices connected to them. This guide describes how to use the MegaRAID Storage Manager software, the WebBIOS configuration utility, and the MegaRAID command line interface.

This document is the primary reference and user’s guide for the LSI MegaRAID SATA+SAS RAID controllers based on the 6Gb/s SAS/SATA RAID-on-a-chip devices. This document contains complete installation instructions for these RAID controllers and includes specifications for them. The 6Gb/s MegaRAID SATA+SAS RAID controllers bring 6.0 Gb/s Serial Attached SCSI and 6.0 Gb/s SATA III performance to host adapter, workstation, and server designs. These controllers support internal storage devices and external storage devices, allowing you to use a system that supports enterprise-class SAS drives and desktop-class SATA III drives.

Complete Codeset

FreeBSD Driver

Linux Drivers

Solaris Drivers

Linux 5.4 Drivers

VMWare Drivers

VMWare Drivers

Windows - Signed

Windows Drivers

Support for CacheCade Pro 2.0 and CacheVault(if enabled).

MegaCLI

Linux SMIS Provider

MegaRAID Storage Manager

MegaRAID Storage Manager

MegaRAID SAS SNMP Installers

MegaRAID Storage Manager

MegaRAID Storage Manager

VMWare SMIS Provider

VMWare SMIS Provider

Windows SMIS Provider

MegaRAID Storage Manager

The Storage Command Line Tool (StorCLI) is a new management application designed for MegaRAID products.

This guide describes the CVPM02 module and explains how to install the module on a remote mount board. In addition, it documents how to connect the module to a CacheVault Flash Module 02 (CVFM02) on the MegaRAID SAS 9266-8i RAID controller. The remote CVPM02 module provides the power to offload cached data from the DRAM to the nonvolatile FLASH memory on the CacheVault Flash Module (CVFM) if a power failure or outage occurs. The DRAM contents are restored to the CVFM module the next time the RAID controller is powered. Cached data can then be written to the storage devices.

This guide describes the CVFM02 module and explains how to attach the module directly to the MegaRAID SAS 9266-4i RAID controller and the MegaRAID SAS 9266-8i RAID controller. In addition, this guide documents how to connect the CVFM02 module by cable to a CacheVault Power Module 02 (CVPM02) module that is mounted on a remote mount board. The CVFM02 module is a USB flash module that provides cache offload capability to protect cached data in case of host power loss or server failure. The CVFM02 module is part of the CacheVault Module Kit LSICVM01, which also includes a CVPM02 module, a clip, and a cable. The CVFM02 module attaches directly to the RAID controller, and then it connects by cable to a remotely located CVPM02 module. The CVPM02 module is a super-capacitor pack that provides power for the backup of your data.