********************************************* LSI Corp. MegaRAID StorCLI Release ********************************************* Release Date: 01/16/13 ======================== Supported Controllers ================== MegaRAID SAS 9270-8i MegaRAID SAS 9271-4i MegaRAID SAS 9271-8i MegaRAID SAS 9271-8iCC MegaRAID SAS 9286-8e MegaRAID SAS 9286CV-8e MegaRAID SAS 9286CV-8eCC MegaRAID SAS 9265-8i MegaRAID SAS 9285-8e MegaRAID SAS 9240-4i MegaRAID SAS 9240-8i MegaRAID SAS 9260-4i MegaRAID SAS 9260CV-4i MegaRAID SAS 9260-8i MegaRAID SAS 9260CV-8i MegaRAID SAS 9260DE-8i MegaRAID SAS 9261-8i MegaRAID SAS 9280-4i4e MegaRAID SAS 9280-8e MegaRAID SAS 9280DE-8e MegaRAID SAS 9280-24i4e MegaRAID SAS 9280-16i4e MegaRAID SAS 9260-16i MegaRAID SAS 9266-4i MegaRAID SAS 9266-8i MegaRAID SAS 9285CV-8e Component: ========= SAS MegaRAID StorCLI Release Date: 01/16/13 Version Numbers: StorCLI =============== =========== Current Version 1.02.08 (Phase 3) Previous Version 1.01.10 (Phase 2) Contents: ========= This package contains StorCLI for the following OSes: Windows Linux VMware VMware MN Solaris FreeBSD EFI (EFI StorCLI version 2.5.1.02.05) Use the StorCLI components from the folder that matches your OS. Enhancements and Bug Fixes ========================== There were few updates in command syntaxes. - See revision history in Rev E : available in Page 2 of user guide(StorCLI_Phase3_RefMan_.pdf) - See revision history in appendix D: available in Page 76 of user guide(StorCLI_Phase3_RefMan_.pdf) SCGCQ00295690 MWCLI. Solaris x86 support SCGCQ00295810 MWCLI for uEFI SCGCQ00314895 MWCLI. FreeBSD 7.x & 8.x support Fixes since Phase 2 Release... SCGCQ00374892 XD1.5-StorCLI attempts to Add/remove configure/unconfigured VDs when add/removal of ALL vds is issued. SCGCQ00355952 StorCLI : Not able to set CC scheduling beyond some limit. SCGCQ00356883 Storcli - legacy commands related to bbu failing in multicontroller environment SCGCQ00345353 storcli /c0/ex show status---> It is not displaying all the information of the enclosure. SCGCQ00356970 StorCLI: The time remaining column is not populated on executing "storcli /c0 show aso" and no description for "Mode" column. SCGCQ00358752 StorCLI: "/c0 show" command displays PD LIST table information occupying more than 80 coloumns SCGCQ00360027 StorCli-Incorrect VD size displayed after expansion of VD size. SCGCQ00335385 Storcli command won't display any controllers SCGCQ00339764 StorCLI_EFI : Getting syntax error for add hotsparedrive command. SCGCQ00343802 StorCLI_EFI : System halts on performing RLM (Raid level Migration) without adding/removing drives, in EFI Environment SCGCQ00352972 StorCli- system halted on executing command " storcli /c0/f show" in UEFI SCGCQ00354167 StorCli- "System hang" while creating the VD using legacy command in UEFI SCGCQ00354581 Storcli_EFI : System halts while executing lengthy commands SCGCQ00315799 4k_DIF: Not able to Replace the missing Drive for 4K VDusing the MegaCLI -Vogel_1.0_sprint_4k Apr 11, 2012 SCGCQ00315801 Creating the 4K VD fails with firmware error description using MegaCLI -Vogel_1.0_sprint_4k SCGCQ00316591 Storcli: Importing Foreign Configuration while Rebuild is in progress Show fall shown multiple R60 VDs SCGCQ00316673 Storcli: Query for Phyinfo using storecli twice, will results in non-functional controller/system hang SCGCQ00316674 Unable to set abortCConerror property on controller card using StoreCli. SCGCQ00316675 Storcli displaying Emergency spare is No for all unconfigured drives while "enableeug" property is ON SCGCQ00337971 StorCLI : Not able to schedule PR in EFI environment SCGCQ00338386 StorCLI : Not able to upgrade controller firmware without using nosigchk and noverchk in EFI Environment. SCGCQ00338398 StorCLI: getting syntax error for pd insert command in EFI Environment SCGCQ00341481 StorCLI - after migration the last pd is getting displayed twice( when migrating from 4pd raid 5 to 6 pd r0 ) SCGCQ00341581 Set path to new library as "export LD_LIBRARY_PATH=/usr/local/lib" after installing libgcc-3.4.6-sol10-x86-local.pkg SCGCQ00341585 fails to log the latest set of events to the file. SCGCQ00341991 StorCLI_EFI: Displaying "?" symbol under progress bar when PD Initialization is in progress SCGCQ00342017 StorCLI: After a controller FW flash from StorCLI, No pending Images are seen before a reboot as seen in the legacy builds. SCGCQ00342072 FreeBSD - Adapter cache Flush is not working . SCGCQ00342077 storecli_EFI.storecli.efi /c0/pall set linkspeed=val It is not displaying PHY info field . SCGCQ00342117 StorCli does not display a help message for "/cx/ex show status h" and storCLI storcli /cx/ex show all h SCGCQ00342241 StorCLI_EFI:Storcli is showing that VD expansion is possible but not allowing to expand if space is before start LBA of VD SCGCQ00342272 StorCLI_EFI : Not able to save the configuration with Megacli syntax SCGCQ00342670 StorCli-"enblPI/PreventPIImport" equivalent command is not their in StorCLi SCGCQ00342693 StorCLI: A Drive spinup/spindown not successful on drives marked as hotspare as against MSM. SCGCQ00342730 Storcli_EFI : Not getting valid JSON output for any of the commands in EFI Environment SCGCQ00342732 StorCLI: the "set bootdrive = on" command sets the requested vd2 as bootable without user intervention. SCGCQ00343591 StorCLI: A dedicated hot spare cannot be assigned to any one of the particular spans for a spanned DG as against MSM. SCGCQ00343636 StorCLI allows a single Unconfigured Drive to be assigned as a dedicated hotspare to two different VD's. SCGCQ00343799 StorCLI: Cannot explicitly assign the configured cachecade VDs to the Disk Groups for the existing CC-VD. SCGCQ00345525 StorCLI: On performing an "add vd" with size provided in TB a decimal value is truncated to whole number as input. SCGCQ00345557 StorCLI: A vd can be assigned to a cachecade VD multiple times also a cachecade VD allows to be assigned to itself. SCGCQ00345791 Storcli: not able to flash PD firmware on FreeBSD SCGCQ00346878 Storcli: Not getting proper import preview for secured foreign VD on EFI and Solaris Environment. SCGCQ00346917 Storcli_EFI : Not able to set securitykey on controller in EFI environment SCGCQ00348494 StorCli-" /c0 show stoponerror" is not working SCGCQ00350582 StorCli- "Disk Group" column is missing. SCGCQ00353580 Storcli- "/c0/fall show" is displaying wrong. SCGCQ00353641 StorCLI - spinup/spindown is not supported for tape drive , but executing spindown operation shows success message SCGCQ00356700 StorCLI - legacy command adpshutdown not working properly SCGCQ00356986 StorCLI - when " stop initialization " command is executed on a pd even when it is not in progress it is showing success SCGCQ00357024 StorCLI - flush|flushcache showing command not supported whereas subsequent legacy command working successfully SCGCQ00360565 In '/cx/vx show all' Active Operations = None during a Rebuild SCGCQ00289586 Emulated Block size should be displayed as part of PD information for 512E drives SCGCQ00316676 StorCLI help does not have the information to show the boot drive SCGCQ00316680 FreeBSD support for MegaWare Cli SCGCQ00318116 StorCLI2.5: "delay" & properties of "Consistency Check" does not function properly SCGCQ00320538 iMR_Inv_MegaCli:Deb package fir MegaCli not available for Ubuntu 12.04 OS SCGCQ00324813 MegaCLI: MFI_STAT_NOT_FOUND returns when retrieving the FW event log. SCGCQ00326760 StorCli adpbbucmd shows next learn cycle would happen 1 day earlier for SuperCaP SCGCQ00327419 StorCli-IN help file-"BBU show status" command is not their. SCGCQ00327557 Storcli-"BBU show help" is not working. SCGCQ00328182 StorCLI2.0: patrolread help description for delay is mentioned in terms of "minutes" instead of "hours" SCGCQ00328204 StorCLI- Individual help for VD expansion does not give the completion description . SCGCQ00328568 StorCli-"PHY Linkspeed show help/? " is not working SCGCQ00329941 StorCli-"DRIVER VERSION" is not displaying for SWR controller on LINUX Platform. SCGCQ00330263 StorCli-" show ds | safeid | rehostinfo help" is not displaying. SCGCQ00330447 StorCli-" On VD show cc help " is not displaying SCGCQ00335327 storcli 1.01.10 doesn't display all required enclosure info for /cx/ex show all, i.e. voltage/ps/temp/etc status/values SCGCQ00337951 Storcli : Exit code is displayed unnecessarily at the end of output on efi environment . SCGCQ00337956 StorCLI: -h is not working for help display in efi environment SCGCQ00337967 StorCLI : getting invalid error code (out of range) while querying for invalid drive number in EFI Environment SCGCQ00338155 StorCLI : VD's exluded from CC Scheduling is not reflected properly with /c0 show cc command in EFI Environment SCGCQ00338194 StorCli-IN help file-"BBU show properties" command is not their. SCGCQ00338206 StorCli- "legacy help file is not displaying" SCGCQ00338265 StorCLI: paged view of any output should support " Press any key to continue" to proceed to next page SCGCQ00338393 StorCLI : Date and Time of controller is not displayed in proper format in EFI Environment SCGCQ00338576 StorCli-"Help page" last line execuite with storcli directory. SCGCQ00339730 StorCLI_EFI : In paged output the lines following the message "Press any key to continue" should be displayed in next line. SCGCQ00340208 code changes for some StorcliEFI-DEFECT SCGCQ00341443 StorCLI - partial help for patrolread delay is not working SCGCQ00341451 StorCLI - show patrolread is not showing the progress of the current patrol read in percentage SCGCQ00341472 StorCLI - show migrate is not displaying the time since the virtual drive migration started SCGCQ00341679 StorCLI : partial help for cc is not working ("/cx show cc h" ) . Giving syntax error SCGCQ00342053 storecli_EFI>storecli h It is displaying description of some commands(use only for partial help). SCGCQ00342122 help file is not available for "storcli dx show all h" SCGCQ00342129 storecli_EFI> storecli.efi /c0/ex show status not displaying ALARM info field SCGCQ00342144 StorCLI - the command "./storcli /c0 show reconrate " is displaying the migrate rate under controller prop SCGCQ00342229 storecli_EFI> After stopping init in multiple vds ,VD status in not updating properly. SCGCQ00342461 StorCLI doesn't show NCQ support of a SATA drive SCGCQ00342597 StorCli-"Perfmode" value is not mentioned in the description SCGCQ00342605 StorCLI does not prompt user intervention while deleting VD which has Boot Partition. SCGCQ00342727 Help description for Controller Properties abbrevations like ABS, SOE is missing in cmd O/P SCGCQ00342737 Not displaying the correct version of driver in megacli command. SCGCQ00342997 StorCLI - not getting partial help for /cx/px set linkspeed h SCGCQ00343108 StorCLI_EFI : Not able to disable/enable Dimmer switch 1 with command /c2 set ds=off/on type=4 SCGCQ00343191 StorCLI - cannot get a helpfile for "./storcli /cx set cc h " SCGCQ00343199 StorCli-In Help File" show/set OCR" command is not their. SCGCQ00343222 FREE BSD- Modifiaction of syntax required in help file for setting consistency check . SCGCQ00343682 StorCLI - Syntax of set cc is given wrong in global help file SCGCQ00343749 StorCLI: mismatch with help file for setting linkspeed with the that of the error message on setting unsupported linkspeed. SCGCQ00343786 StorCLI - "storcli /cx delete securitykey"when executed twice in a row shows a success status in controller properties SCGCQ00344142 The size is in KB for "WithArrExp" instead of GB under EXPANSION INFORMATION SCGCQ00344188 Help file not working for 'storcli /cx/vx expand ? ' SCGCQ00344707 StorCLI: 512KB Stripe size is not mentioned in CLI help page of "storcli /cx add vd h" SCGCQ00345311 StorCLI - "storcli /cx/pall set linkspeed = 1.5/3 ... " showing success but setting it individual is showing a comand invalid SCGCQ00345706 ./storcli /c0 set perfmode=val ----->It is setting perfmode value other than 0 and 1 SCGCQ00345907 StorCli-" show aso " command is missing in help file. SCGCQ00346025 ./Storcli -AdpGetPciInfo -a0 ---->This command is not displaying information like bus,device,functional no. of the adapter. SCGCQ00346919 Storcli_EFI : partial query for commands is not working with numbers like /c0 set h (works only with /cx ) SCGCQ00348538 StorCli-"Firmware Package Build" version is not showing in controller Info (UEFI) SCGCQ00348706 StorCli-"/c0 set ds h" in help description need to some changes. SCGCQ00349475 StorCLI: The "gas gauge" needs to be addressed under "show BBU status h" SCGCQ00349498 StorCLI: A help file to be added for "storcli /c0/bbu start learn" SCGCQ00351169 ./storcli /c0 set securitykey=xxx passphrase=xxx ---->Description of securitykey should be display in description field. SCGCQ00351987 Storcli : Unexpected line at output when legacy command ''Adpallinfo'' executed with page=x SCGCQ00352560 The help file for "set backplane" needs to be revised. SCGCQ00352571 StorCLI: "The set backplane = 0" the command value description exceeds 80 charecters. SCGCQ00352630 STORCLI: Command to set SOE(stop on Error) is missing in global help file SCGCQ00352637 StorCLI: Global/Individual help missing for command to set ABS(Auto Boot Select) . SCGCQ00352779 User guide PDF file for Technical and Documentation are required to be updated. SCGCQ00352887 None of the build is having readme file except solaris in the storcli build ---->ver 1.02-02 Oct 23,2012 SCGCQ00353682 Storcli- Displaying incomplete foreign config even if all the drives are in Ugood state for /c0/fall show command SCGCQ00353683 after controller firmware download completes Description is showing the firmware package version instead of firmware version SCGCQ00354235 Storcli: StorCLI should throw syntax error for the command /c0/dall show all all all SCGCQ00354543 StorCLI: help legend missing for "show freespace" SCGCQ00355107 StorCLI-Require Update of the URL mentioned in Readme File of SOLARIS11 . SCGCQ00355116 Storcli_EFI : Showing success for non-supported operations, related with association of VD to cachepool. SCGCQ00355137 Storcli - when setting smartpollinterval to -1 , it is throwing syntax error instead of failure . SCGCQ00355367 StorCLI- Description for what kind & range of value will be accepted by memscrubpatterns is not provided in help file SCGCQ00355432 StorCLI : Not able to set CC execution delay if used with complete CC scheduling command SCGCQ00356657 Special Charecters are printed or the state info is missing under the state column of the drive. SCGCQ00356695 StorCLI - when stop command for PD reated operations is executed . The command description shows wrong slot id's for PD's SCGCQ00356998 Storcli-display command when used with "page" is not showing the output correctly... SCGCQ00357319 The "EID:Slot" is not populated on fetching information on the existing foreign configuration. SCGCQ00357371 StorCLI: The PD list table is not sorted acoording to enclosureid:slotid. SCGCQ00357647 storcli: cliefimain.cpp file changes for lengthy commands. SCGCQ00357648 Storcli reports baterry is charging and discharging at the same time. SCGCQ00359371 Storcli-"show" info need to add abbreviation for "PDs/DGs/VDs/BBU/Y" SCGCQ00361544 StorCli-"/c0 start pr " in failure state displaying worng 'error message'. SCGCQ00364859 Correcting the formats of below commands (exit code ,show event log and time, date format ) SCGCQ00328185 StorCli-In legacy help file command line execute along with" press any key to continue"-only Windows OS SCGCQ00328531 StorCLI2.0: phy linkspeed help description is mentioned in terms of "GB" instead of "Gb/s" SCGCQ00333006 LSI MegaCLI EncInfo (Enclosure Info) duplicates the first power supply status data to both power supplies SCGCQ00338675 'VD ADD' should use 'strip' instead of 'stripe'. SCGCQ00341595 StorCLI - Spelling mismatch "Alta" specified which should either be "SATA" or "ATA" SCGCQ00342071 storcli help command with "Legacy" and "page" option doesnt display the paged help. SCGCQ00342978 StorCli-"Phy linkspeed show all help" in description spelling mistake is their. SCGCQ00343142 StorCli-"eccbucketleakrate" , the value should be greater than ‘0’ and less than ‘65535’. Help is misleading. SCGCQ00344136 Description for option [expandarray] in command storcli /cx/v(x|all) expand Size= is not clear SCGCQ00344150 StorCLI - partial help ( Descripton ) for command "storcli /cx /bbu show properties h " is not there SCGCQ00344171 StorCli-"Smartpollinterval"value need to be mention in the Description. SCGCQ00344800 Help legend is missing for properties of enclosure in O/P of ./storcli /c0/e59 show all and show cmds SCGCQ00344994 StorCLI - "storcli /cx/vx show preservedcache " command is not present in the help file SCGCQ00352071 Storcli_EFI : "storcli -h legacy" cmd is not working SCGCQ00352881 Alignment text issue in the O/P of command "storcli.efi /c0 show eventlogInfo" SCGCQ00359980 Code cleanup in Univ_viva_cli SCGCQ00340241 StorCLI - " insert " command is not working SCGCQ00338560 StorCLI : Driver version is not displayed correctly SCGCQ00339757 StorCLI_EFI : Progress field for drive erase operation is displaying "?' symbol if drive erase is in progress. SCGCQ00342762 StorCli-"Driver Version" field is missing (Free BSD 7.3) SCGCQ00343005 StorCLI: Stripe Size of the VD is shown incorrect after a PD missing operation is performed on the disk group. SCGCQ00346251 storcli does not report ROC temperature in '/cX show all' in HW section SCGCQ00354427 StorCli-"System halts" on performing operation "/c0 set aso key= " in UEFI SCGCQ00342052 StorCLI - command "./storcli show " is throwing a description message that command is not supported SCGCQ00343169 StorCli-"Show/set OCR help" is not Displaying SCGCQ00344861 storecli_EFI > storecli.efi /c0 set perfmode h---> In perfmode help file it is not giving what values we can set. SCGCQ00346944 Storcli: Inquiry data of the drives is missing from output of /cx/ex/sx show all command on FreeBSD with TB controller SCGCQ00354191 Storcli - giving syntax error when trying to get help using numbers , e.g "storcli_efi /c0 h " SCGCQ00355847 StorCli- "Serial Number" of physical Drives is not getting displayed in FreeBSD SCGCQ00341986 StorCLI: Does not prompt the user to restart/reboot the controller after a FW flash for it to take effect as seen in MSM. SCGCQ00348048 StorCLI: StorCLI does not provide single command to perform a locate drive configured as part of a VD as against MSM. SCGCQ00348474 .\storCLI64.exe /c1 add vd type=r1 drives=47:1,2 ----> command is giving syntax error if using "comma" for vd creation. SCGCQ00350579 StorCLI: The VD name cannot contain spaces as allowed in MSM. SCGCQ00358917 EFI Shell StorCLI: Rebuild starts and does not make any progress in EFI env SCGCQ00375019 “StorCli64.exe /xd/wdall show” command reports that NytroXD license is absent even when the license is available SCGCQ00318433 Porting of Vogel 1.0 PRs to storcli phase 2.5 SCGCQ00341607 Failing to display Driver Version in FreeBSd SCGCQ00343664 Storcli-"Enclosure Slot No is mis matching "(DE1600-SAS ) Important Notes: ================== STORCLI PHASE 2.0 Specific Limitations: 1. User can use both 'raid0' and 'r0' for mentioning the raid level. And user can find both the forms in the help command. 2. When passing parameter,'set' for CC mode is mandatory. 3. The use of comma in between array no and row parameter in the syntax for making ‘pdreplacemissing’ should not be used. 4. User would not be able to specify ROWs while creating ‘Dedicated Hot Spare’. Instead user needs to use ‘Drive Group ID’ as dgs=N 5. In ‘Foreign Configuration show’, utility will display VD as ‘Foreign’ instead of showing the VD state. 6. The success code and description is printed only after complete processing of the command. Success will not be printed unless the entire log is displayed to the output. Hence the success code and description is printed at the end of the log for this particular command. 7. Any command syntax is still valid, if user uses “-” instead of “/” for e.g. storcli.exe /c0-vall show. 8. Show ‘Bus and PCI Slot type’ are not shown as part of the controller information. 9. While creating a VD using non-Enc-ID Devices, user needs to provide inputs in the format ‘D:SlotID’ as syntax (for eg: Drives=D:1,2,3 where 1,2,3 are the slot ids of the non encID devices) 10. Tape Drives will be listed only with /c0/sall show all command, /c0/sall show doesn’t list Tape drive but only display the direct attached drives if present or a blank table if none are connected. 11. Importing Foreign Configuration while Rebuild is in progress then query for Show fall the output would display multiple R60 VDs. 12. Date and Time of controller is not displayed in proper format in EFI Environment 13. JSON is not required in EFI 14. The sector size of the drives are displayed in “KB” instead of bytes under the PD List table. This is just display error in tabular format but it is displayed correctly in drive details. 15. The “Eid:slot” column while importing a foreign config is not populated. StorCLI: The VD name cannot contain spaces as allowed in MSM. 16. Consistency Check cannot be scheduled beyond year-2037AD. 17. Flashing 9260CV low-level controller firmware is supported only through DOS version of CLI (MegaCLI) and not through EFI version of StorCLI. Flashing MegaRAID firmware does not have this issue. Known Behavior: 1. ‘All VD initialization’ command when run through StorCLI utility, shows the error message as failed for cachecaded VD. This is a generic limitation. 2. While reconstruction is in progress, start of CC/Init/BGI operations on same VD throws an inappropriate error message. This is a generic limitation. 3. In controller show cc the field CC current state will change only when it meets the schedule CC parameters. 4. All the unsupported commands for SWR controller if tried to execute may result in unknown behavior for example – system hang-up. For the list of unsupported commands refer to user guide Appendix C: Unsupported Commands in Embedded RAID. 5. Output for controller information contains junk characters in VMware ESXi 4.1 update2. 6. FDE drives are displayed as secured drives on SWR- SCU controller. 7. There is no check to see whether user has entered different properties or the same property multiple times in StorCLI command. Hence StorCLI does not throw syntax error for the command “/c0/dall show all all all”. This issue is because of the implementation of accepting multiple properties in a single command line in some cases. Installation Commands: ======================= Refer to the User's Guide included in the package. ======================= Previous Releases ======================= Component: ========= SAS MegaRAID StorCLI Release Date: 11/06/12 Version Numbers: StorCLI =============== =========== Current Version 1.01.10 Contents: ========= This package contains StorCLI for the following OSes: Windows Linux VMware VMware MN Use the StorCLI components from the folder that matches your OS. Enhancements and Bug Fixes ========================== Initial Release Important Notes: ================== 1. User can use both ‘raid0’ and ‘r0’ for mentioning the raid level. And user can find both the forms in the help command. 2. When passing parameter ‘set' for CC mode is mandatory. 3. The use of comma in between array no and row parameter in the syntax for making ‘pdreplacemissing’ should not be used. 4. User would not be able to specify ROWs while creating ‘Dedicated Hot Spare’. Instead user needs to use ‘Drive Group ID’ as dgs=N 5. In ‘Foreign Configuration show’, utility will display VD as ‘Foreign’ instead of showing the VD state. 6. The success code and description is printed only after complete processing of the command. Success will not be printed unless the entire log is displayed to the output. The success code and description is printed at the end of the log for this particular command. 7. Any command syntax is still valid, if user uses “-” instead of “/” (e.g. storcli.exe /c0-vall show.) 8. Show ‘Bus and PCI Slot type’ are not shown as part of the controller information. 9. While creating a VD using non-Enc-ID Devices, user needs to provide inputs in the format ‘D:SlotID’ as syntax (e.g. Drives=D:1,2,3 where 1,2,3 are the slot ids of the non encID devices.) 10. Tape Drives will be listed only with /c0/sall show all command. /c0/sall show doesn’t list Tape drive but only displays the direct attached drives if present or a blank table if none are connected. 11. Importing Foreign Configuration while Rebuild is in progress then query for Show fall the output would display multiple R60 VDs. 12. For any operation (Migrate/Init/BGI/CC) percentile completed in minutes is not displayed in StorCLI output. 13. ‘All VD initialization’ command when run through StorCLI utility, shows the error message as failed for cachecaded VD. 14. While reconstruction is in progress, start of CC/Init/BGI operations on same VD throws an inappropriate error message. 15. In controller show cc the field CC current state will change only when it meets the schedule CC parameters. 16. All the unsupported commands for SWR controller if tried to execute may result in unknown behavior for example – system hang-up. For the list of unsupported commands refer to user guide Appendix C: Unsupported Commands in Embedded RAID. 17. Output for controller information contains junk characters in VMware ESXi 4.1 update2. 18. FDE drives are displayed as secured drives on SWR- SCU controller. Installation Commands: ======================= Refer to the User's Guide included in the package.