************************************ LSI Corp. MegaRAID Firmware Release ************************************ Release date: 03/05/13 ====================== Supported Controllers: ====================== MegaRAID SAS 9260-4i MegaRAID SAS 9260CV-4i MegaRAID SAS 9260-8i MegaRAID SAS 9260CV-8i MegaRAID SAS 9260DE-8i MegaRAID SAS 9261-8i MegaRAID SAS 9280-4i4e MegaRAID SAS 9280-8e MegaRAID SAS 9280DE-8e MegaRAID SAS 9280-24i4e MegaRAID SAS 9280-16i4e MegaRAID SAS 9260-16i ******* This firmware supports Cachecade Pro 2.0 (if activated) for the controllers mentioned above. ******* This single firmware image can be used on all of the controllers mentioned above (no longer need separate image for the high-port-count controllers). Component: ========= SAS MegaRAID Firmware Release for MegaRAID Controllers Release date: 03/05/13 Version Numbers: =============== Current Firmware Package (with CacheCade Pro 2.0): 12.13.0-0154 (Merged) Firmware 2.130.383-2315 Medusa_Expander SAS2XFW-25.05.04.00_MFGIMG-25.05.04.00 NVDATA 2.09.03-0045 BootBlockCommon 09.250.01.219 BootBlock 2.02.00.00-0000 ROMENV 1.08 WebBIOS 6.0-51-e_47_Rel PCLI 4.04.20 UEFI_Driver 0x05270000 Hii 1.36.00 BIOS 3.27.00 FCODE 4.12.05.00 Previous Firmware Package (with CacheCade Pro 2.0): 12.13.0-0151 (Merged) Firmware 2.130.383-2230 Medusa_Expander SAS2XFW-25.05.04.00_MFGIMG-25.05.04.00 NVDATA 2.09.03-0041 BootBlockCommon 09.250.01.219 BootBlock 2.02.00.00-0000 ROMENV 1.08 WebBIOS 6.0-51-e_47_Rel PCLI 4.04.20 UEFI_Driver 0x05270000 Hii 1.36.00 BIOS 3.27.00 FCODE 4.12.05.00 Bug Fixes and Enhancements: =========================== Firmware: SCGCQ00307050 Defect Not able to flash both 9265-8i and 9285-8e card with 5.3 patch 1 firmware.However, it is ok on 9266-8i. SCGCQ00338490 Defect Invalid target ID after new logical drive creation SCGCQ00341791 Defect Support for mutlipath topology is broken SCGCQ00361303 Defect On iMR FW update caused card to FW fault state and card cannot boot to OS. SCGCQ00371477 Defect During Reconstruction (R0->R5) when system reboots the reconstruction doesnt resume. System hangs. SCGCQ00375250 Defect OEM BMC see clock stetching on I2C bus SCGCQ00375854 Defect adapterOperations.alarmControl is being set to 1 even if controller doesnot have alarm on board SCGCQ00384381 Defect Drive temperature is shown very high on 9240 SCGCQ00391094 Defect 9260-16i's drive locate/fault LED header doesn't work SCGCQ00392062 Defect Firmware halts when flashing components other than app.rom for OEM controller SCGCQ00392063 Defect PL library and files checkin for PL version 5.38 SCGCQ00396335 Defect 9260-16i's drive locate/fault LED header is not working properly. SCGCQ00363619 EnhancementRequest Set the Recovery mode page (WriteRetryCount and recoveryTimeLimit) Installation: ============= Use MegaCLI or StorCLI to flash the SAS controllers. These tools can be downloaded from the support and download section of www.lsi.com. Command syntax: MegaCli -adpfwflash -f mr2108fw.rom -a0 or StorCLI /c0 download file=mr2108fw.rom ============================== Previous Releases ============================== Component: ========= SAS MegaRAID Firmware Release for MegaRAID Controllers Release date: 03/02/13 Version Numbers: =============== Current Firmware Package (with CacheCade Pro 2.0): 12.13.0-0151 (Merged) Firmware 2.130.383-2230 Medusa_Expander SAS2XFW-25.05.04.00_MFGIMG-25.05.04.00 NVDATA 2.09.03-0041 BootBlockCommon 09.250.01.219 BootBlock 2.02.00.00-0000 ROMENV 1.08 WebBIOS 6.0-51-e_47_Rel PCLI 4.04.20 UEFI_Driver 0x05270000 Hii 1.36.00 BIOS 3.27.00 FCODE 4.12.05.00 Previous Firmware Package (with CacheCade Pro 2.0): 12.12.0-0139 (Merged) Firmware 2.130.373-2022 Medusa_Expander SAS2XFW-25.05.04.00_MFGIMG-25.05.04.00 NVDATA 2.09.03-0041 BootBlockCommon 09.250.01.219 BootBlock 2.02.00.00-0000 ROMENV 1.08 WebBIOS 6.0-51-e_47_Rel PCLI 4.04.20 UEFI_Driver 0x05210000 Hii 1.33.00 BIOS 3.26.00 FCODE 4.12.05.00 Bug Fixes and Enhancements: =========================== Firmware: SCGCQ00341980 - (Closed) - Current Access policy is not getting updated for iMR SCGCQ00353935 - (Resolved) - Add support for Ringbuffer and Dq compilation SCGCQ00356925 - (Closed) - disableHII: Needs to be updated from nvdata into MFCD SCGCQ00357046 - (Closed) - 9240-4i on particular motherboard is not getting required memory resources on boot SCGCQ00349562 - (Closed) - Unable to open "Set Patrol Read Properties" in MSM with 2008-iMR SCGCQ00362340 - (Closed) - multi path with Consistency Check LED behavior problem SCGCQ00342405 - (Implemented) - Enable or disable 512E using Applications SCGCQ00342397 - (Implemented) - Provide the count of LBAs that are present in the sata bbm table. SCGCQ00350996 - (Closed) - Fail the IO in case the medium error recovery is taking more time. SCGCQ00359200 - (Port_Complete) - offline drive becomes automatically online during Raid Level Migration SCGCQ00371803 - (Port_Complete) - During Reconstruction (R0->R5) when system reboots the reconstruction doesnt resume. System hangs. SCGCQ00358361 - (Port_Complete) - Bad disk being serviced hung Linux boot for 2 hours SCGCQ00373802 - (Port_Complete) - Auto Foreign import fails when controller is booted with pinned cache. UEFI Driver: SCGCQ00347171 - (Closed) - MR: on having pinned cache on OEM controller, the option to invoke storage dosent come. SCGCQ00369636 - (Closed) - UEFI: Settime only when FW time is not set; DHP: Return appropriate health status when there is no critical boot message SCGCQ00340581 - (Implemented) - UEFI Driver should check pMRCtrlInfo ->maxHANodes with > 1 SCGCQ00318101 - (Closed) - Timed critical boot message under UEFI mode SCGCQ00347492 - (Closed) - UEFI: Retry read capacity if scsi status is not success SCGCQ00310476 - (Implemented) - Load HII when user responds to critical boot message by pressing C HII: SCGCQ00268038 (DFCT) - Hii enter black screen/timeout when user switching between fields/form sub_form and during Pd rebuild. SCGCQ00364156 (CSET) - Remove debug message which is not applicable for non Mercury customers Installation: ============= Use MegaCLI or StorCLI to flash the SAS controllers. These tools can be downloaded from the support and download section of www.lsi.com. Command syntax: MegaCli -adpfwflash -f mr2108fw.rom -a0 or StorCLI /c0 download file=mr2108fw.rom Component: ========= SAS MegaRAID Firmware Release for MegaRAID Controllers Release date: 12/28/2012 Version Numbers: =============== Current Firmware Package (with CacheCade Pro 2.0): 12.12.0-0139 (Merged) Firmware 2.130.373-2022 Medusa_Expander SAS2XFW-25.05.04.00_MFGIMG-25.05.04.00 NVDATA 2.09.03-0041 BootBlockCommon 09.250.01.219 BootBlock 2.02.00.00-0000 ROMENV 1.08 WebBIOS 6.0-51-e_47_Rel PCLI 4.04.20 UEFI_Driver 0x05210000 Hii 1.33.00 BIOS 3.26.00 FCODE 4.12.05.00 Previous Firmware Package (with CacheCade Pro 2.0): 12.12.0-0124 (Merged) Firmware 2.130.363-1846 Medusa_Expander SAS2XFW-25.05.04.00_MFGIMG-25.05.04.00 NVDATA 2.09.03-0039 BootBlockCommon 09.250.01.219 BootBlock 2.02.00.00-0000 ROMENV 1.08 WebBIOS 6.0-51-e_47_Rel PCLI 4.04.20 UEFI_Driver 0x05180000 Hii 1.32.00 BIOS 3.25.00 FCODE 4.12.05.00 Bug Fixes and Enhancements: =========================== Firmware defects: SCGCQ00262426 - If VD is secured while reconstruction is going on does not stay secured once reconstruction is done. SCGCQ00313883 - Battery continually stating Battery Yearly Deep Discharge Relearn Pending. Please Initiate a manual Relearn SCGCQ00319537 - System hang on IBM machine with a critical boot message SCGCQ00327006 - Event (MR_EVT_CTRL_RESETNOW_DONE ) is not generated after OFU is completed SCGCQ00329851 - EEPROM corruption(BQ2060 errata) due to corrupted value of design Capacity written in FCC for iBBU07 SCGCQ00332181 - INVALID SGL causes dump into montask, OCR does not recover. MonTask: line 377 in file ../../dm/mpt2/mptrec.c & MonTask: line SCGCQ00333679 - reverting the changes of SCGCQ00295604 SCGCQ00333696 - EEPROM corruption(BQ2060 errata) due to corrupted value of design Capacity written in FCC for iBBU07 SCGCQ00334032 - Code review checkin SCGCQ00335607 - Firmware upgrade/downgrade not possible due to missing env stamping SCGCQ00336716 - Megamon issue when disabling the drive security on a MR controller with spun down FDE drives. SCGCQ00337894 - OFU is not happening when tried to upgrade firmware. SCGCQ00338008 - Flash of package with OFU request SCGCQ00345497 - Code review: With the new approach for CtrlOFUPossibleSet/Get() shutdown path broken SCGCQ00346275 - Copyback on a drive hits kill adapter SCGCQ00347253 - Firmware fails to return proper value when flashed same firmware image with different stamping with OFU request. SCGCQ00353344 - Data Corruption during Raid Level Migration SCGCQ00335935 - Coverity Defect fixes SCGCQ00286152 - GetConnectorIndex() Out of bound array access SCGCQ00334889 - Multiple switch cases are not handles correctly in debug functions SCGCQ00314781 - Controller always enter HSM when it is set to HCOE SCGCQ00317767 - Code Review Defect: Correct the error in copy back path smart errors path SCGCQ00333346 - Dont interpret the cachecade BVD flags if the volume is created with old FW which does not support cachecade. SCGCQ00340772 - Address Action Item SCGCQ00340495 (Check coding standard for structure OfuRequestState) SCGCQ00332658 - Out-of-bounds access (OVERRUN_STATIC) of an array "ar" in pdCopyBackSpinupCallBack SCGCQ00332651 - Out-of-bounds access (OVERRUN_STATIC) of an array "nvInfo->lockKeyBlob.keyCheck" in displayNvKeyInfo SCGCQ00329070 - Coverity Defect SCGCQ00315029 - PD clear operation is not handle correctly with spun drive drives SCGCQ00332588 - Fix coverity defects 10216 and 10425 (overrun and potential NULL pointer access) SCGCQ00307050 - Not able to flash both 9265-8i and 9285-8e card with 5.3 patch 1 firmware.However, it is ok on 9266-8i. SCGCQ00353322 - Unable to enable ocr using application due to FW ocr setting taking precedence SCGCQ00328109 - Out of bound access in LDBBMListInit SCGCQ00337060 - Coverity Defects SCGCQ00341791 - Support for mutlipath topology is broken SCGCQ00330344 - FW halts with a a kill adaptor on performing an onffline of the drive under copyback. line 1188 in file ../../raid/1078dma.c SCGCQ00332099 - Out-of-bounds access (OVERRUN_STATIC) of an array "ar" in pdDcmdRebuildCB Firmware Enhancements: SCGCQ00302600 - Added more debug information SCGCQ00307949 - True FW Online update for Liberator SCGCQ00307950 - BGI is in endless loop continuously restarting after completion SCGCQ00308988 - Improve foreign config import for iMR with mixed JBOD/RAID settings SCGCQ00314258 - Need the ability to determine what disk a logical LBA associate with on the fly, api call/algorithim/etc. on Liberator SCGCQ00323446 - Add NVDATA support to make 512 Emulated drive support as configurable for customers. SCGCQ00345203 - megacli reports battery pack is missing on hot insertion SCGCQ00314965 - iBBU07 - SOH bad will be declared for low capacity battery before starting learn cycle SCGCQ00307956 - iBBU07: EEPROM and register values will be updated to revised values at first boot after FW flash. BIOS: Version change only UEFI Driver: SCGCQ00262858 Defect Debug message is shown from EFI app choice prompt SCGCQ00308870 Defect EFI Driver 518\When disconnecting the driver in EFI, I am still able to exectue the EFI utility menu. SCGCQ00312683 Defect UEFI Driver not timing out in 3 mins when FW is in undefined state SCGCQ00320619 Defect UEFI: Build Device Path and Get Next Target function of SCSI Pass Thru is not returning correct EFI status for certain cases SCGCQ00335617 Defect Drives are reporting timeout on Write Buffer cmd SCGCQ00339371 Defect UEFI Driver fails SCT Test SCGCQ00343869 Defect Enhance critical boot message handling SCGCQ00338066 EnhancementRequest UEFI - HAMR: Fire LD list query based on maxHANodes SCGCQ00338782 EnhancementRequest If SetOptions is called for Invader dont show EFI WebBIOS and EFI CLI option SCGCQ00340581 EnhancementRequest UEFI Driver should check pMRCtrlInfo ->maxHANodes with > 1 to determine HAMR HII: SCGCQ00318010 (DFCT) - Allows to select Cachecade VD as Boot device SCGCQ00319005 (DFCT) - HII will not allow config to be cleared no drives attached SCGCQ00319010 (DFCT) - HII while in safe mode locks up when entering View drive SCGCQ00293056 (ENHREQ) - HII: LSIP200198414/LSIP200229508/LSIP200231613: Disables all requirement for human input at boot time SCGCQ00317934 (ENHREQ) - Add MFI State error string for the new MFI stat error codes SCGCQ00317991 (ENHREQ) - Remove 'Adaptive Read Ahead' option from every MegaRAID management utility (PR: SCGCQ00295908) Installation: ============= Use MegaCLI or StorCLI to flash the SAS controllers. These tools can be downloaded from the support and download section of www.lsi.com. Command syntax: MegaCli -adpfwflash -f mr2108fw.rom -a0 or StorCLI /c0 download file=mr2108fw.rom Component: ========= SAS MegaRAID Firmware Release for MegaRAID Controllers Release date: 10/15/2012 Version Numbers: =============== Current Firmware Package (with CacheCade Pro 2.0): 12.12.0-0124 (Merged) Firmware 2.130.363-1846 Medusa_Expander SAS2XFW-25.05.04.00_MFGIMG-25.05.04.00 NVDATA 2.09.03-0039 BootBlockCommon 09.250.01.219 BootBlock 2.02.00.00-0000 ROMENV 1.08 WebBIOS 6.0-51-e_47_Rel PCLI 4.04.20 UEFI_Driver 0x05180000 Hii 1.32.00 BIOS 3.25.00 FCODE 4.12.05.00 Previous Firmware Package (with CacheCade Pro 2.0): 12.12.0-0111 (Merged) Firmware 2.130.353-1663 Medusa_Expander SAS2XFW-25.05.04.00_MFGIMG-25.05.04.00 BootBlockCommon 09.250.01.219 BootBlock 2.02.00.00-0000 ROMENV 1.08 NVDATA 2.09.03-0032 PCLI 4.04.20 WebBIOS 6.0-49-e_45-Rel Hii 1.28.00 UEFI_Driver 0x05160000 BIOS 3.24.00 FCODE 4.12.05.00 Bug Fixes and Enhancements: =========================== Firmware: ========= SCGCQ00263446 - (Closed) - Support SGPIO SideBand with/without Activity SCGCQ00296744 - (Closed) - enable Emergency hotspare capability for channel SCGCQ00323446 - (Closed) - Add NVDATA support to make 512 Emulated drive support as configurable for customers. SCGCQ00286613 - (Closed) - ER corresponding to LSIP200230920 SCGCQ00290530 - (Closed) - Band Gap charging for iBBU08 SCGCQ00288679 - (Implemented) - ER corresponding to LSIP200122939 SCGCQ00290531 - (Closed) - Learn Improvement - Do not take Command block if there is no LD for which cache policy will change SCGCQ00308820 - (Closed) - Bbumode is 5 instead of 0 for iBBU07 SCGCQ00311062 - (Closed) - Fatal firmware error: Line 1842 during FC import SCGCQ00284536 - (Closed) - 9260 controller VD goes offline during Slow/Full/Foreground Initialize with 3TB Seagate SED SAS drives SCGCQ00301160 - (Closed) - Limited band Charging for all OEMs SCGCQ00298687 - (Closed) - Code Review defect to handle SA_INVALID_FIELD_IN_CDB SCGCQ00292830 - (Closed) - FW correctly removes entries in the SBBM table by properly shifting the entries to the right. SCGCQ00292943 - (Closed) - Allocate BBLog for iMR Initally during boot up SCGCQ00295474 - (Closed) - BBU mode is set to 5 for BBU07 in ctrl-h SCGCQ00294981 - (Closed) - FW Montask on every boot SCGCQ00252606 - (Closed) - Drive fails after I/O timeout and subsequent target reset during continuous firmware flash. SCGCQ00295130 - (Closed) - spare pointer is incorrectly used in MR_CONFIG_DATA SCGCQ00290512 - (Closed) - Checked in the review comment for SCGCQ00286613 SCGCQ00313883 - (Closed) - Battery continually stating Battery Yearly Deep Discharge Relearn Pending. Please Initiate a manual Relearn SCGCQ00319537 - (Closed) - System hang on OEM machine with a critical boot message WebBIOS: ======== SCGCQ00295052 (DFCT) - Change BBU Mode description for Liberator batteries. HII: ==== SCGCQ00294957 (DFCT) - Manage SSD Caching is showing all the VD's in the list in HII. Installation: ============= Use MegaCLI to flash the SAS controllers. MegaCLI can be downloaded from the support and download section of www.lsi.com. Command syntax: MegaCli -adpfwflash -f mr2108fw.rom -a0 Component: ========= SAS MegaRAID Firmware Release for MegaRAID Controllers Release date: 06/18/2012 Version Numbers: =============== Current Firmware Package (with CacheCade Pro 2.0): 12.12.0-0111 (Merged) Medusa_Expander SAS2XFW-25.05.04.00_MFGIMG-25.05.04.00 Firmware 2.130.353-1663 BootBlockCommon 09.250.01.219 BootBlock 2.02.00.00-0000 ROMENV 1.08 NVDATA 2.09.03-0032 PCLI 4.04.20 WebBIOS 6.0-49-e_45-Rel Hii 1.28.00 UEFI_Driver 0x05160000 BIOS 3.24.00 FCODE 4.12.05.00 Previous Firmware Package (with CacheCade Pro 2.0): 12.12.0-0102 (Merged) Previous Package Details: APP-2.130.293-1580_BB-2.02.00.00-0000_BIOS-3.24.00_4.12.05.00_0x05160000_HII-_WEBBIOS-6.0-48-e_44-Rel_PCLI-04.04-01900008_BOOT-09.250.01.219_NVDATA-2.09.03-0031_2012_03_22 Bug Fixes and Enhancements: =========================== Firmware: ========= SCGCQ00263235 (DFCT) - SCGCQ00279191 Native configuration is no longer supported message in post SCGCQ00265898 (DFCT) - FW quiesces IO when LC starts on BBU even in "WB always" mode SCGCQ00280109 (DFCT) - Patrol Reads on SSD drives SCGCQ00281507 (DFCT) - N/A SCGCQ00281546 (DFCT) - Implemented the limited band charging SCGCQ00284230 (DFCT) - Megamon during Injecting errors to VD with 512e PDs on iMR controller SCGCQ00281888 (CSET) - Native configuration is no longer supported message in post SCGCQ00283734 (CSET) - CRC errors during TSOC communication LSIP200231744 (DFCT) Update BBU eeprom offset 0x08 and 0x09 LSIP200212236 (DFCT) iMR FW : Fail to read the header info from CFI Flash ROM during repeated system reboot. LSIP200231285 (DFCT) Disable logging in flash for specific OEM Installation: ============= Use MegaCLI to flash the SAS controllers. MegaCLI can be downloaded from the support and download section of www.lsi.com. Command syntax: MegaCli -adpfwflash -f mr2108fw.rom -a0 Component: ========= SAS MegaRAID Firmware Release for MegaRAID Controllers Release date: 05/21/2012 Version Numbers: =============== Current Firmware Package (with CacheCade Pro 2.0): 12.12.0-0102 (Merged) Current Package Details: APP-2.130.293-1580_BB-2.02.00.00-0000_BIOS-3.24.00_4.12.05.00_0x05160000_HII-_WEBBIOS-6.0-48-e_44-Rel_PCLI-04.04-01900008_BOOT-09.250.01.219_NVDATA-2.09.03-0031_2012_03_22 Previous Firmware Package (with CacheCade Pro 2.0): 12.12.0-0091 Previous Package Details: APP-2.130.243-1483_BB-2.02.00.00-0000_BIOS-3.24.00_4.12.05.00_0x05120000_WEBBIOS-6.0-42-e_37-Rel_PCLI-04.04-01900008_BOOT-09.250.01.219_NVDATA-2.09.03-0029_SAS2XFW-25.05.04.00_MFGIMG-25.05.04.00_2012_01_07 Bug Fixes and Enhancements: =========================== Firmware: ========= LSIP200223753 (DFCT) (CL LSIP200221295) Reboot Causes HSP to Revert to Unconfigured Good LSIP200222937 (DFCT) (CL LSIP200210145) Adding/Removing FoD key causes Legacy BIOS to stop and not continue LSIP200222809 (DFCT) Amber LED flashes during copyback after rebuilding degraded VD LSIP200223758 (DFCT) Falcon FW - 1509/recon starting and progressing in 1.21 HII LSIP200223351 (DFCT) (CL LSIP200223304) R5/R6 enabled using FOD and do a OCR on controller;R5 VD comes up as foreign once OCR is done LSIP200229774 (DFCT) 10M09 Liberator: Querying SMART / PFA Status Returns All Zeros in Sense Data LSIP200225195 (DFCT) Clearing excess drive error LSIP200230774 (DFCT) FW fails to create configuration and utilites fail to report the VD size after the reconstruction. LSIP200222944 (DFCT) HDD powersave options still shown in Ctrl Info,VD info & VD creation menus of HII becase FW reports it supports PS LSIP200187938 (DFCT) SATA FDE disk not recognized as FDE, SAS model is LSIP200223120 (DFCT) Secured Drives Counts as Two Physical Drives LSIP200230641 (DFCT) Megamon during import of FC from MR to iMR contoller LSIP200210843 (DFCT) Battery is < 623mAH and LUNS in writeback mode LSIP200229432 (DFCT) Port LSIP200211420 to Liberator - Upon OCR, Recon Ghost LD needs to be created before WJ processing LSIP200223461 (DFCT) (CL LSIP200223341) If you enable security on controller using FOD and create secure VD it goes missing upon reboot. LSIP200221295 (DFCT) Reboot Causes HSP to Revert to Unconfigured Good LSIP200222969 (DFCT) (RW LSIP200222956) (CL LSIP200222934) After OCR+reboot, user is asked to hit enter to ack the activated FOD features on LSIP200199420 (DFCT) 'clear' tasks on disks always show 0% complete when doing 'init' task on RAID volume LSIP200222391 (DFCT) BBU Charging gets disabled when Transparent Relearn fails to start due to low capacity LSIP200223703 (DFCT) HWR: 10M09: PD other error counter never increments LSIP200229673 (DFCT) Fix compilation issue LSIP200230643 (DFCT) Error message pop out in HII when set to factory default. LSIP200222594 (DFCT) Windows blue screen while in background rebuild process LSIP200222918 (DFCT) cannot auto rebuild while we put a clean - JBOD LSIP200222956 (DFCT) (CL LSIP200222934) After OCR+reboot, user is asked to hit enter to ack the activated FOD features on OEM system. LSIP200210345 (CO) (auto4comp FW_SAS_LSI) Read Locate LED state via BMC LSIP200229612 (CO) (auto4comp FW_SAS_LSI) Change EDV values in iBBU07 to improve accuracy with aging batery packs LSIP200151207 (CR) Read Locate LED state via BMC LSIP200224034 (CR) Change EDV values in iBBU07 to improve accuracy with aging batery packs WebBIOS: ======== LSIP200223149 (DFCT) HII/HII browser sluggishness is seen when exiting browser, going to EFI WebBIOS, and then going back to HII browser LSIP200223217 (DFCT) IMR-Web Bios shown Configured drives option in Manage power save settings LSIP200230109 (DFCT) Grammatical error in WebBIOS. LSIP200224127 (DFCT) In WebBIOS, Drive Group Definition screen, enclosures should not be selectable in the Drives column LSIP200230031 (DFCT) In EFI-WebBIOS (ver: 4.0-e_45-Rel), the white bars do not match up under VD properties page. BIOS: ======== Numerous UEFI and HII updates NVDATA: ======= Numerous NVDATA changes Installation: ============= Use MegaCLI to flash the SAS controllers. MegaCLI can be downloaded from the support and download section of www.lsi.com. Command syntax: MegaCli -adpfwflash -f mr2108fw.rom -a0 Component: ========= SAS MegaRAID Firmware Release for MegaRAID Controllers Release date: 01/30/2012 Version Numbers: =============== Current Firmware Package (with CacheCade Pro 2.0): 12.12.0-0091 Current Package Details: APP-2.130.243-1483_BB-2.02.00.00-0000_BIOS-3.24.00_4.12.05.00_0x05120000_WEBBIOS-6.0-42-e_37-Rel_PCLI-04.04-01900008_BOOT-09.250.01.219_NVDATA-2.09.03-0029_SAS2XFW-25.05.04.00_MFGIMG-25.05.04.00_2012_01_07 Previous Firmware Package (2108 with CacheCade Pro 2.0) : 12.12.0-0077 Previous Package Details: APP-2.130.163-1437_BB-2.02.00.00-0000_BIOS-3.22.00_4.11.05.00_0x05060000_HII-_WEBBIOS-6.0-42-e_37-Rel_PCLI-04.04-01800008_BOOT-09.250.01.219_NVDATA-2.09.03-0026_2011_11_01 Previous Firmware Package (High-Port-Count controllers with CacheCade Pro 2.0): 12.12.0-0080 Previous Package Details: APP-2.130.163-1437_BB-2.02.00.00-0000_BIOS-3.22.00_4.11.05.00_0x05060000_WEBBIOS-6.0-42-e_37-Rel_PCLI-04.04-01800008_BOOT-09.250.01.219_NVDATA-2.09.03-0026_SAS2XFW-25.05.04.00_MFGIMG-25.05.04.00_2011_11_10 Previous Firmware Package (High-Port-Count controllers without CacheCade Pro 2.0): 12.12.0-0074 Previous Package Details: APP-2.120.183-1415_BB-2.02.00.00-0000_BIOS-3.23.00_4.11.05.00_0x05080000_WEBBIOS-6.0-45-e_40-Rel_PCLI-04.04-01800008_BOOT-09.250.01.219_NVDATA-2.09.03-0024_SAS2XFW-25.05.04.00_MFGIMG-25.05.04.00_2011_10_06 Bug Fixes and Enhancements: =========================== Firmware: ========= LSIP200209948 (CO) Generally available support of selected battery modes for iBBU08. LSIP200199484 (CO) Enable copy back on SMART - Liberator LSIP200151375 (CO) Need StopOnError functionality when SafeStore passphrase is enabled LSIP200199858 (CO) add display of ibbu communication retry counter in fw log LSIP200188345 (DFCT) (CL LSIP200185468) extended retries of write verify command causes driver timeout LSIP200211360 (DFCT) (CL LSIP200209847) Pulling VD 0 from an R60 and rebooting, 2 foreign configs when array 0 LSIP200199863 (DFCT) UnconfigGood PD fails to kick in as EHS (Emergency Hot Spare) LSIP200212811 (DFCT) Advanced features key have to be re-entered LSIP200050209 (DFCT) DATA TLB error exception in case of manual removal/insertion of drives. LSIP200051385 (DFCT) R1 rebuild hangs at 50% mark after CC is run LSIP200051392 (DFCT) Fw broke into MegaMon while writing a test file to a VD (R6) from a non MR disk. LSIP200221925 (DFCT) SATA workaround handles LBA incorrectly for 6-byte read CDB LSIP200186584 (DFCT) Logical Unit ID (VPD page 0x83) changed after foreign import LSIP200198521 (DFCT) P16 set properties command fails LSIP200212818 (DFCT) Port forward LSIP200211068 to main stream liberator maintenance LSIP200212644 (DFCT) Sepaton noticed additional fan speed event messages every 2 minutes LSIP200186884 (DFCT) DelaySOD is not working on customer Liberator boards LSIP200150532 (DFCT) Liberator FW cause system (sles11sp1/rhel6) reset while lspci -vvx LSIP200188226 (DFCT) can't sustain at least 950 MBps performance with Cache Flush setting 1 sec LSIP200200459 (DFCT) MegaCli prematurely returns exit 0x0 status on drive firmware flash LSIP200209349 (DFCT) Enable PCI capability Bit for VPD exsupport. LSIP200198466 (DFCT) wrong slot # reported by megaraid compared to physical slot for EG disk LSIP200199687 (DFCT) “Non-Transparent” learns seen with Mode 3 LSIP200210349 (DFCT) BBUmode incorrectly set LSIP200210823 (DFCT) No data is copied to target array after more than 15 secs LSIP200212264 (DFCT) Multibit ECC error with customer Liberator MR board and vmware ESXi5.0 LSIP200199735 (DFCT) LSI Mega RAID SAS-MFI BIOS Register state 0xF0010002 LSIP200211484 (DFCT) MR bios show "adapter at baseport is not responding" intermittence LSIP200186966 (DFCT) configuration becomes foreign after fw fails 3-4 attempts to access raid key during boot LSIP200210596 (DFCT) too many messages in fw log "ArDiskTypeMisMatch : SAS_SATA_MIXING_VIOLATION” LSIP200155948 (DFCT) FW seems to incorrectly mark ibbu's SOH bad (iBBU07, ibbu05, ibbu01) LSIP200209279 (DFCT) additional reboot required after updating ibbu FCC to design capacity LSIP200210505 (DFCT) OEM requests qty of prints to be reduced in fw log for ibbu i2c communication retries LSIP200212471 (DFCT) FW automatically starts learn cycles on ibbu08 every reboot LSIP200211810 (DFCT) Battery failed message during learn cycle LSIP200212311 (DFCT) Battery failed message during learn cycle LSIP200199812 (DFCT) Alarm sounds with online VD's after flashing latest 10M09 Patch 16 firmware (2.120.163-1343) LSIP200199961 (DFCT) LDBBM entries are incorrect after foreign import LSIP200186336 (DFCT) Controller does not work with pci set to nomsi in kdump kernel LSIP200209455 (DFCT) Potential data integrity issue while running the IO on degraded R5 VDs with 32 drives. LSIP200200117 (DFCT) unexpected Power State Change events occur LSIP200185441 (DFCT) Disk performance disparity between WB controller cache on and off on system disks LSIP200210751 (DFCT) Patrol Read fails on R1 with around 2000 double medium errors LSIP200210768 (DFCT) Enabling security causes the config to be missing, and a configured FDE array to be seen as foreign on reboot. LSIP200209385 (DFCT) Intermittent RAID key failure during power-on LSIP200209329 (DFCT) FoD features will not activate or deactivate LSIP200199416 (DFCT) Change BBU-08 support Firmware Mode5 WB capacity from 960mAh to 674mAh for low power DDR-2 LSIP200199331 (DFCT) Older ibbu batteries display 65K capacity and are marked SOH bad LSIP200199335 (DFCT) Request FW to not mark ibbu battery as bad when very high capacity is detected LSIP200196885 (DFCT) Batteries Not Charging properly on OEM controller LSIP200209376 (DFCT) OEM requests ibbu i2c communication retries to be displayed in fw log Webbios: ======== None BIOS: ======== LSIP200199737 (DFCT) server System posts 'R00' as 'R0' during the reboot LSIP200199163 (DFCT) Legacy BIOS BBS Boot Issues LSIP200196810 (DFCT): SWR-Macon: After installing the OS, unable to boot from SCU VD LSIP200199602 (DFCT): FW hangs during POST after flashing new BIOS LSIP200018807 (DFCT): BIOS sees extra characters "0%" at end of particular product name LSIP200156493 (DFCT): There is no space between FW version and capacity in the table where Adp/VD/PD info is displayed Numerous UEFI and HII updates NVDATA: ======= Numerous NVDATA changes Installation: ============= Use MegaCLI to flash the SAS controllers. MegaCLI can be downloaded from the support and download section of www.lsi.com. Command syntax: MegaCli -adpfwflash -f mrCCP2.rom -a0 Component: ========= SAS MegaRAID Firmware Release for MegaRAID Controllers Release date: 11/15/11 Includes support for CacheVault and CacheCade Pro 2.0 features (on appropriately enabled controllers) Version Numbers: =============== Current Firmware Package: 12.12.0-0077 Current Package Details: APP-2.130.163-1437_BB-2.02.00.00-0000_BIOS-3.22.00_4.11.05.00_0x05060000_HII-_WEBBIOS-6.0-42-e_37-Rel_PCLI-04.04-01800008_BOOT-09.250.01.219_NVDATA-2.09.03-0026_2011_11_01 Previous Firmware Package (CacheVault): PKG_CFL_12.12.0-0006 Previous Package Details: APP-2.120.73-1289_BB-2.02.00.00-0000_BIOS-3.22.00_4.11.05.00_0x05030000_WEBBIOS-6.0-35-e_30-Rel_PCLI-04.04-017_SPRINT400008_BOOT-01.250.04.219_NVDATA-2.09.03-0014_2011_05_25 Previous Firmware Package (CacheCade): 12.13.0-0104 Previous Package Details: APP-2.130.03-1332_BB-2.02.00.00-0000_BIOS-3.20.00_4.11.05.00_0x0418A000_WEBBIOS-6.0-42-e_37-Rel_PCLI-04.04-01900008_BOOT-01.250.04.219_NVDATA-2.09.03-0012_2011_08_05 Bug Fixes and Enhancements: =========================== Firmware: Based on 10M09 P15 LSIP200188321 (CO) (auto4comp FW_SAS_LSI) Support CacheVault with CacheCade Pro 2.0 LSIP200187926 (CO) (auto4comp FW_SAS_LSI) Change Liberator BBU-08 support Firmware Mode5 WB capacity from 960mAh to 674mAh for low power D LSIP200187931 (CO) (auto4comp FW_SAS_LSI) disable bad phy checking logic from iMR FW for certain ROMB design LSIP200149890 (CO) (auto4comp FW_SAS_LSI) SW licensing. Support FoD for PF activations on iMR/2008 LSIP200187910 (CO) (auto4comp FW_SAS_LSI) Request to use Unconfigured Good Drives for a HotSpare if no spare defined in liberator LSIP200187724 (CO) (auto4comp FW_SAS_LSI) MR fw should Enable puncturing for SATA drives LSIP200187937 (CO) (auto4comp FW_SAS_LSI) MegaRaid does not pick up replacement drives in PD if replacement is added during power cycle LSIP200186977 (CO) (auto4comp FW_SAS_LSI) Alert should be sent when one phy connector between Liberator card and SAS expander is degraded LSIP200186343 (CO) (LSIP200140211) Add support to pass SMART errors for JBOD drives to MSM LSIP200147589 (CO) (LSIP200170593) B/G: manufacturing: suppress first relearn LSIP200200361 (DFCT) FW hit monstak when create PRL 11 LSIP200209556 (DFCT) DATA TLB ERROR exception: sf c01ffd60 when pull out power cord while I/O are running LSIP200209619 (DFCT) Possible data integrity issue with multiple RAID + changing VD policy while I/O running LSIP200185599 (DFCT) LED behavior incorrect, drive 3 blinks when drive 0 is accessed LSIP200150304 (DFCT) memory test for 2108 in 10M09 FW fails LSIP200149986 (DFCT) MSM log shows "Battery cannot initiate transparent learn cycles" due to BBU is under mode 5. LSIP200060949 (DFCT) iBBU07 reported remaining capacity is much too high (64751 mAh) after a learn cycle LSIP200151502 (DFCT) BBU Absolute Charge is displayed differently LSIP200149843 (DFCT) VPD (Vital Product Data) needs to show correct Part number LSIP200149844 (DFCT) VPD (Vital Product Data) needs to identify PCB hardware level LSIP200151221 (DFCT) CLI/EFI CLI/PCLI fail to create a VD on MR LSIP200148150 (DFCT) WHQL WLK1.6 - SCSI Compliance Test 2.0 and Read Capacity 16 Unit FAILS on Liberator LSIP200184970 (DFCT) HWR: 10M09: not able to disable BGI with MegaCLI LSIP200173287 (DFCT) HWR: bbuMode is not in WebBIOS after flashing from 10M05 to 10M09 LSIP200186406 (DFCT) Code Review defect to deliver rest of changes for PFK preboot support. LSIP200186594 (DFCT) R5 pfk feature not getting enabled at boot time on iMR LSIP200186595 (DFCT) After loading FoD key, iMR controller does not perform upgrade of features LSIP200184943 (DFCT) Need ability to boot with pinned cache with any raid config on Gen 2 MegaRAID/Liberator defaulted to ON LSIP200185931 (DFCT) Bootwithpinnedcache not default set to '1' for castorlite when suboem is '1' LSIP200151328 (DFCT) HWR: EF & 10M09: bluescreen occurs handling R1 with HSP and medium errors LSIP200149597 (DFCT) Liberator FW : Entire VD Configuration is cleared on next boot after snapshot feature is disabled. LSIP200100479 (DFCT) NVDIMM unrecoverable memory errors treated similar to ECC errors LSIP200100537 (DFCT) Adding Premiumfeatured reqd bit and ENABLE_SAVE in set and reset LED LSIP200100786 (DFCT) Cache offload : Fw initialization faild after flashing the Cache offload app to Liberator board. LSIP200100800 (DFCT) In pinned cache to be in WT, bootup error cases, bbumain and bootup with regular controller LSIP200105734 (DFCT) IO path size increased after merging to 10m09 code base and the ECC error fix LSIP200113125 (DFCT) For cache offload modules to stage BIOS from SRAM LSIP200114431 (DFCT) Update the cap pacakge version information to the VPD area LSIP200114426 (DFCT) CacheOffload : Write Property is changing from WB to WT during rebuild operation. LSIP200114471 (DFCT) CacheOffload : Firmware breaks to MegaMon while doing OCR when pinned cache cache is present. LSIP200119766 (DFCT) The I2C commands should not be sent during the Learn cycle LSIP200119787 (DFCT) Firmware breaks to MegaMon while doing OCR when pinned cache cache is present.(2) LSIP200120034 (DFCT) Adding 2msec delay after every I2C transaction LSIP200121171 (DFCT) CacheOffload : While reading the VPD information firmware is breaking to MegaMon. LSIP200123172 (DFCT) pfk_nvarm_clear option added for updating the PFK NVRAM both romid and crc LSIP200123191 (DFCT) To support the Subvendor and Sub Device Ids for the cacheoffload LSIP200095206 (DFCT) Cache ofload : Reconstruction continues even when Pinned cache is present. LSIP200134429 (DFCT) The upload feature tested with 0.6 FW and FW download timeout value reduced LSIP200135106 (DFCT) To support the tmmfru id in EepromWriteMfg2Data LSIP200125315 (DFCT) CacheOffload : Controller cache discarded due to memory/battery problems. LSIP200137154 (DFCT) Cacheoffload :Online upgrade of Powergem with 06 fw shows error. LSIP200125290 (DFCT) with 0.6 FW the download process takes 9 to 10 min's approxmiately and the upload process takes 3 to 4min's LSIP200144816 (DFCT) Fault LED on module glows continously LSIP200146636 (DFCT) CacheOffload : 5% reserve pool gf module is not posting the expected events. LSIP200153376 (DFCT) After FW download reset after exiting from PMODE LSIP200147680 (DFCT) CacheOffload : Online upgarde of .8 fw corrupts the VPD information. LSIP200147681 (DFCT) Cacheoffload : communication loss while running the relearn script for multiple times. LSIP200147688 (DFCT) pack energy calculation, support for backup inhibit in 1.0, increase in nvdata size and code review changes LSIP200147767 (DFCT) Increase in nvdata uncompress size after nvdata rebase to 10m09 LSIP200148965 (DFCT) CacheOFFLoad : Reconstruction does not start when "enableCTIO" is set to "1". LSIP200149213 (DFCT) fru id event logged only if valid id present LSIP200149034 (DFCT) Cacheoffload : SATA PD not getting detected while connecting it as direct attached. LSIP200096885 (DFCT) Cacheoffload 10m09 merge LSIP200097050 (DFCT) Cacheoffload: Write Policy is not changing while Battery relearn is in progress. LSIP200097349 (DFCT) Cache offload: VD with WB can be created even when enableCacheOffload is dissabled in MFc settings. LSIP200098524 (DFCT) Cache offload : Battery learn starts even when cache offload feature is disable in MFc. LSIP200099276 (DFCT) PFK Disable,extended header for FW download and gtg timeout after reset LSIP200099393 (DFCT) The check for GTG added after releasing the NF image LSIP200134428 (DFCT) Double dip and 3.2 spec compatibility BIOS: ====== LSIP200042149 DAS Cache Offload Management LSIP200139406 Three 9260/80 controllers cant boot from MR LD with post 10M09 12.12.0-0036 LSIP200152136 Attempting to load WebBIOS causes some systems to hang LSIP200134837 FW revision is not displayed in the Bios' controller list Installation: ============= Use MegaCLI to flash the SAS controllers. MegaCLI can be downloaded from the support and download section of www.lsi.com. Command syntax: MegaCli -adpfwflash -f mr2108fw.rom -a0 Component: ========= SAS MegaRAID Firmware Release for MegaRAID Controllers Release date: 04/15/2011 Version Numbers: =============== Current Firmware Package: 12.12.0-0044 Current Package Details: APP-2.120.43-1223_BB-2.02.00.00-0000_BIOS-3.22.00_4.11.05.00_0x05020000_WEBBIOS-6.0-34-e_29-Rel_PCLI-04.04-01700008_BOOT-01.250.04.219_NVDATA-2.09.03-0012_SAS2XFW-25.05.04.00_MFGIMG-25.05.04.00_2011_03_17 Previous Firmware Package: 12.12.0-0044 Previous Package Details: APP-2.120.23-1181_BB-2.02.00.00-0000_BIOS-3.21.00_4.11.05.00_0x05000000_WEBBIOS-6.0-34-e_29-Rel_PCLI-04.04-01700008_BOOT-01.250.04.219_NVDATA-2.09.03-0010_SAS2XFW-25.05.04.00_MFGIMG-25.05.04.00_2011_02_12 Bug Fixes and Enhancements: =========================== Firmware: ========= LSIP200158868 (DFCT) Power save mode hangs firmware causing driver to send kill adpter command LSIP200145892 (DFCT) Liberator FW 10M09 cause system (sles11sp1/rhel6) reset while lspci -vvxxx is used LSIP200153318 (DFCT) FW doesn’t detect the iBBU08 if it is remotely mounting with OEM controller BIOS: ======== HII changes only Installation: ============= Use MegaCLI to flash the SAS controllers. MegaCLI can be downloaded from the support and download section of www.lsi.com. Command syntax: MegaCli -adpfwflash -f mrhighpc.rom -a0