************************************ LSI Corp. MegaRAID Firmware Release ************************************ Release date: 10/15/12 ====================== Supported Controllers: ====================== MegaRAID SAS 9240-4i MegaRAID SAS 9240-8i Component: ========= SAS MegaRAID Firmware Release for MegaRAID Controllers Release date: 10/15/2012 Version Numbers: =============== Current Firmware Package: 20.10.1-0119 (Merged) Firmware 2.130.364-1847 WebBIOS 4.0-59-e_48-Rel ROMENV 1.08 BootBlock 2.02.00.00-0001 NVDATA 3.09.03-0043 PCLI 03.02.20 Hii 1.31.00 UEFI_Driver 0x05180000 FCODE 4.12.05.00 BIOS 4.31.00 Previous Firmware Package: 20.10.1-0107 (Merged) iMR Firmware 2.130.354-1664 WebBIOS 4.0-57-e_46-Rel ROMENV 1.08 BootBlock 2.02.00.00-0001 NVDATA 3.09.03-0037 PCLI 03.02.20 Hii 1.28.00 UEFI_Driver 0x05160000 FCODE 4.12.05.00 BIOS 4.30.00 Bug Fixes and Enhancements: =========================== Firmware: ========= SCGCQ00308820 - (Closed) - Bbumode is 5 instead of 0 for iBBU07 SCGCQ00311062 - (Closed) - Fatal firmware error: Line 1842 during FC import SCGCQ00284536 - (Closed) - 9260 controller VD goes offline during Slow/Full/Foreground Initialize with 3TB Seagate SED SAS drives SCGCQ00301160 - (Closed) - Limited band Charging for all OEMs SCGCQ00298687 - (Closed) - Code Review defect to handle SA_INVALID_FIELD_IN_CDB SCGCQ00292830 - (Closed) - FW correctly removes entries in the SBBM table by properly shifting the entries to the right. SCGCQ00292943 - (Closed) - Allocate BBLog for iMR Initally during boot up SCGCQ00295474 - (Closed) - BBU mode is set to 5 for BBU07 in ctrl-h SCGCQ00294981 - (Closed) - FW Montask on every boot SCGCQ00252606 - (Closed) - Drive fails after I/O timeout and subsequent target reset during continuous firmware flash. SCGCQ00284230 - (Closed) - Megamon during Injecting errors to VD with 512e PDs on iMR controller SCGCQ00295130 - (Closed) - spare pointer is incorrectly used in MR_CONFIG_DATA SCGCQ00290512 - (Closed) - Checked in the review comment for SCGCQ00286613 SCGCQ00313883 - (Closed) - Battery continually stating Battery Yearly Deep Discharge Relearn Pending. Please Initiate a manual Relearn SCGCQ00319537 - (Closed) - System hang on OEM machine with a critical boot message SCGCQ00263446 - (Closed) - Support SGPIO SideBand with/without Activity SCGCQ00296744 - (Closed) - enable Emergency hotspare capability for channel SCGCQ00323446 - (Closed) - Add NVDATA support to make 512 Emulated drive support as configurable for customers. SCGCQ00286613 - (Closed) - ER corresponding to LSIP200230920 SCGCQ00290530 - (Closed) - Band Gap charging for iBBU08 SCGCQ00288679 - (Implemented) - ER corresponding to LSIP200122939 SCGCQ00290531 - (Closed) - Learn Improvement - Do not take Command block if there is no LD for which cache policy will change WebBIOS: ======== SCGCQ00295052 (DFCT) - Change BBU Mode description for Liberator batteries. Installation: ============= Use MegaCLI to flash the SAS controllers. MegaCLI can be downloaded from the support and download section of www.lsi.com. Command syntax: MegaCli -adpfwflash -f imr_fw.rom -a0 ============================================================================================ Previous Releases ========================= Component: ========= SAS MegaRAID Firmware Release for MegaRAID Controllers Release date: 06/18/2012 Version Numbers: =============== Current Firmware Package: 20.10.1-0107 (Merged) iMR Firmware 2.130.354-1664 WebBIOS 4.0-57-e_46-Rel ROMENV 1.08 BootBlock 2.02.00.00-0001 NVDATA 3.09.03-0037 PCLI 03.02.20 UEFI_Driver 0x05160000 Hii 1.28.00 BIOS 4.30.00 FCODE 4.12.05.00 Previous Firmware Package: 20.10.1-0099 (Merged) Previous Package Details: APP-2.130.294-1580_BB-2.02.00.00-0001_BIOS-4.30.00_4.12.05.00_0x05150000_WEBBIOS-4.0-57-e_46-Rel_PCLI-03.02-01900008_NVDATA-3.09.03-0036_2012_03_22 Bug Fixes and Enhancements: =========================== Firmware: ========= SCGCQ00263235 (DFCT) - SCGCQ00279191 Native configuration is no longer supported message in post SCGCQ00280109 (DFCT) - Patrol Reads on SSD drives SCGCQ00281507 (DFCT) - N/A SCGCQ00281546 (DFCT) - Implemented the limited band charging SCGCQ00284230 (DFCT) - Megamon during Injecting errors to VD with 512e PDs on iMR controller SCGCQ00281888 (CSET) - Native configuration is no longer supported message in post SCGCQ00283734 (CSET) - CRC errors during TSOC communication LSIP200212236 (DFCT) iMR FW : Fail to read the header info from CFI Flash ROM during repeated system reboot. LSIP200231285 (DFCT) Disable logging in flash for specific OEM Installation: ============= Use MegaCLI to flash the SAS controllers. MegaCLI can be downloaded from the support and download section of www.lsi.com. Command syntax: MegaCli -adpfwflash -f imr_fw.rom -a0 Component: ========= SAS MegaRAID Firmware Release for MegaRAID Controllers Release date: 05/21/2012 Version Numbers: =============== Current Firmware Package: 20.10.1-0099 (Merged) Current Package Details: APP-2.130.294-1580_BB-2.02.00.00-0001_BIOS-4.30.00_4.12.05.00_0x05150000_WEBBIOS-4.0-57-e_46-Rel_PCLI-03.02-01900008_NVDATA-3.09.03-0036_2012_03_22 Previous Firmware Package: 20.10.1-0077 Previous Package Details: APP-2.120.244-1482_BB-2.02.00.00-0001_BIOS-4.30.00_4.12.05.00_0x05120000_WEBBIOS-4.0-55-e_44-Rel_PCLI-03.02-01700008_NVDATA-3.09.03-0034_2011_12_29 Bug Fixes and Enhancements: =========================== Firmware: ========= LSIP200223753 (DFCT) (CL LSIP200221295) Reboot Causes HSP to Revert to Unconfigured Good LSIP200222937 (DFCT) (CL LSIP200210145) Adding/Removing FoD key causes Legacy BIOS to stop and not continue LSIP200222809 (DFCT) Amber LED flashes during copyback after rebuilding degraded VD LSIP200223758 (DFCT) Falcon FW - 1509/recon starting and progressing in 1.21 HII LSIP200223351 (DFCT) (CL LSIP200223304) R5/R6 enabled using FOD and do a OCR on controller;R5 VD comes up as foreign once OCR is done LSIP200229774 (DFCT) 10M09 Liberator: Querying SMART / PFA Status Returns All Zeros in Sense Data LSIP200225195 (DFCT) Clearing excess drive error LSIP200230774 (DFCT) FW fails to create configuration and utilites fail to report the VD size after the reconstruction. LSIP200222944 (DFCT) HDD powersave options still shown in Ctrl Info,VD info & VD creation menus of HII becase FW reports it supports PS LSIP200187938 (DFCT) SATA FDE disk not recognized as FDE, SAS model is LSIP200223120 (DFCT) Secured Drives Counts as Two Physical Drives LSIP200230641 (DFCT) Megamon during import of FC from MR to iMR contoller LSIP200210843 (DFCT) Battery is < 623mAH and LUNS in writeback mode LSIP200229432 (DFCT) Port LSIP200211420 to Liberator - Upon OCR, Recon Ghost LD needs to be created before WJ processing LSIP200223461 (DFCT) (CL LSIP200223341) If you enable security on controller using FOD and create secure VD it goes missing upon reboot. LSIP200221295 (DFCT) Reboot Causes HSP to Revert to Unconfigured Good LSIP200222969 (DFCT) (RW LSIP200222956) (CL LSIP200222934) After OCR+reboot, user is asked to hit enter to ack the activated FOD features on LSIP200199420 (DFCT) 'clear' tasks on disks always show 0% complete when doing 'init' task on RAID volume LSIP200222391 (DFCT) BBU Charging gets disabled when Transparent Relearn fails to start due to low capacity LSIP200223703 (DFCT) HWR: 10M09: PD other error counter never increments LSIP200229673 (DFCT) Fix compilation issue LSIP200230643 (DFCT) Error message pop out in HII when set to factory default. LSIP200222594 (DFCT) Windows blue screen while in background rebuild process LSIP200222918 (DFCT) cannot auto rebuild while we put a clean - JBOD LSIP200222956 (DFCT) (CL LSIP200222934) After OCR+reboot, user is asked to hit enter to ack the activated FOD features on OEM system. LSIP200210345 (CO) (auto4comp FW_SAS_LSI) Read Locate LED state via BMC LSIP200229612 (CO) (auto4comp FW_SAS_LSI) Change EDV values in iBBU07 to improve accuracy with aging batery packs LSIP200151207 (CR) Read Locate LED state via BMC LSIP200224034 (CR) Change EDV values in iBBU07 to improve accuracy with aging batery packs WebBIOS: ======== LSIP200223149 (DFCT) HII/HII browser sluggishness is seen when exiting browser, going to EFI WebBIOS, and then going back to HII browser LSIP200223217 (DFCT) IMR-Web Bios shown Configured drives option in Manage power save settings LSIP200230109 (DFCT) Grammatical error in WebBIOS. LSIP200224127 (DFCT) In WebBIOS, Drive Group Definition screen, enclosures should not be selectable in the Drives column LSIP200230031 (DFCT) In EFI-WebBIOS (ver: 4.0-e_45-Rel), the white bars do not match up under VD properties page. BIOS: ======== Numerous UEFI and HII updates NVDATA: ======= Numerous NVDATA changes Installation: ============= Use MegaCLI to flash the SAS controllers. MegaCLI can be downloaded from the support and download section of www.lsi.com. Command syntax: MegaCli -adpfwflash -f imr_fw.rom -a0 Component: ========= SAS MegaRAID Firmware Release for MegaRAID Controllers Release date: 01/30/2012 Version Numbers: =============== Current Firmware Package: 20.10.1-0077 Current Package Details: APP-2.120.244-1482_BB-2.02.00.00-0001_BIOS-4.30.00_4.12.05.00_0x05120000_WEBBIOS-4.0-55-e_44-Rel_PCLI-03.02-01700008_NVDATA-3.09.03-0034_2011_12_29 Previous Firmware Package: 20.10.1-0061 Previous Package Details: APP-2.120.184-1415_BB-2.02.00.00-0001_BIOS-4.29.00_4.12.05.00_0x05080000_WEBBIOS-4.0-54-e_42-Rel_PCLI-03.02-01500008_NVDATA-3.09.03-0027_2011_10_06 Bug Fixes and Enhancements: =========================== Firmware: ========= LSIP200199863 (DFCT) UnconfigGood PD fails to kick in as EHS (Emergency Hot Spare) LSIP200050209 (DFCT) DATA TLB error exception in case of manual removal/insertion of drives. LSIP200051385 (DFCT) R1 rebuild hangs at 50% mark after CC is run LSIP200221925 (DFCT) SATA workaround handles LBA incorrectly for 6-byte read CDB LSIP200212818 (DFCT) Port forward LSIP200211068 to main stream liberator maintenance LSIP200212644 (DFCT) noticed additional fan speed event messages every 2 minutes LSIP200198466 (DFCT) wrong slot # reported by megaraid compared to physical slot for EG disk LSIP200210823 (DFCT) No data is copied to target array after more than 15 secs LSIP200212264 (DFCT) Multibit ECC error with customer Liberator MR board and vmware ESXi5.0 LSIP200199735 (DFCT) SL1:LSI Mega RAID SAS-MFI BIOS Register state 0xF0010002 LSIP200211484 (DFCT) MR bios show "adapter at baseport is not repoonding" intermittence LSIP200210596 (DFCT) HWR: 10M09: too many messages in fw log "ArDiskTypeMisMatch : SAS_SATA_MIXING_VIOLATION” LSIP200200117 (DFCT) HWR: 10M09: unexpected Power State Change events occur LSIP200185441 (DFCT) Disk performance disparity between WB controller cache on and off on system disks LSIP200210751 (DFCT) Patrol Read fails on R1 with around 2000 double medium errors WebBIOS: ======== LSIP200210939 (DFCT) System showed error message when entering uFEI web-bios BIOS: ======== LSIP200199737 (DFCT) Server System posts 'R00' as 'R0' during the reboot LSIP200186779 (DFCT) Option ROM should use PMM to allocate 32MB scratch memory if BIOS supports LSIP200200358 (DFCT) Doesn't show the JBOD information on BIOS Posting Numerous UEFI and HII updates NVDATA: ======= Numerous NVDATA changes Installation: ============= Use MegaCLI to flash the SAS controllers. MegaCLI can be downloaded from the support and download section of www.lsi.com. Command syntax: MegaCli -adpfwflash -f imr_fw.rom -a0 Component: ========= SAS MegaRAID Firmware Release for MegaRAID Controllers Release date: 10/14/2011 Version Numbers: =============== Current Firmware Package: 20.10.1-0061 Current Package Details: APP-2.120.184-1415_BB-2.02.00.00-0001_BIOS-4.29.00_4.12.05.00_0x05080000_WEBBIOS-4.0-54-e_42-Rel_PCLI-03.02-01500008_NVDATA-3.09.03-0027_2011_10_06 Previous Firmware Package: 20.10.1-0037 Previous Package Details: APP-2.120.54-1235_BB-2.02.00.00-0001_BIOS-4.24.00_4.11.05.00_0x05020000_WEBBIOS-4.0-45-e_33-Rel_PCLI-03.02-01500008_NVDATA-3.09.03-0018_2011_04_06 Bug Fixes and Enhancements: =========================== Firmware: ========= LSIP200149248 (CO) Warning for High Error Counts LSIP200149890 (CO) SW licensing. Support FoD for PF activations on iMR/2008 LSIP200187910 (CO) Request to use Unconfigured Good Drives for a HotSpare if no spare defined in liberator LSIP200187724 (CO) MR fw should Enable puncturing for SATA drives LSIP200187937 (CO) MegaRaid does not pick up replacement drives in PD if replacement is added during power cycle LSIP200151375 (CO) Need StopOnError functionality when SafeStore passphrase is enabled LSIP200187926 (CO) Change Liberator BBU-08 support Firmware Mode5 WB capacity from 960mAh to 674mAh LSIP200187931 (CO) disable bad phy checking logic from iMR FW for certain ROMB design LSIP200199858 (CO) add display of ibbu communication retry counter in 10M09 fw log LSIP200199484 (CO) Enable copy back on SMART - Liberator LSIP200186977 (CO) Alert should be sent when one phy connector between Liberator card and SAS expander is degraded LSIP200149050 (CO) Add SGPIO for Medusa LSIP200186343 (CO) (LSIP200140211) Add support to pass SMART errors for JBOD drives to MSM LSIP200185599 (DFCT) LED behavior incorrect, drive 3 blinks when drive 0 is accessed LSIP200209385 (DFCT) Intermittent RAID key failure during power-on LSIP200209329 (DFCT) FoD features will not activate or deactivate LSIP200170440 (DFCT) (RW LSIP200153454) Firmware Incompleted Writes During Power Fail and Recovery LSIP200156822 (DFCT) CC2.0: WT Downgrade FW from CC2.0 to CC1.0(10M09) and import caused MonTask: line 199 in file ../../raid/1078int.c LSIP200149201 (DFCT) (CL LSIP200146291) Medium error handling fixes for >2TB LSIP200199812 (DFCT) Alarm sounds with online VD's after flashing latest 10M09 Patch 16 firmware (2.120.163-1343) LSIP200199961 (DFCT) (CL LSIP200061413) LDBBM entries are incorrect after foreign import LSIP200186336 (DFCT) Controller does not work with pci set to nomsi in kdump kernel LSIP200209455 (DFCT) (CL LSIP200188135) Potential data integrity issue while running the IO on degraded R5 VDs with 32 drives. LSIP200158264 (DFCT) Change the capacity level that generates the Predictive failure alert LSIP200150304 (DFCT) memory test for 2108 in 10M09 FW fails immediately LSIP200149986 (DFCT) MSM log shows "Battery cannot initiate transparent learn cycles" due to BBU is under mode 5. LSIP200060949 (DFCT) iBBU07 reported remaining capacity is much too high (64751 mAh) after a learn cycle LSIP200151502 (DFCT) BBU Absolute Charge is displayed differently LSIP200149843 (DFCT) VPD (Vital Product Data) needs to show correct Part number LSIP200149844 (DFCT) VPD (Vital Product Data) needs to identify PCB hardware level LSIP200199416 (DFCT) Change BBU-08 support Firmware Mode5 WB capacity from 960mAh to 674mAh for low power DDR-2 LSIP200199331 (DFCT) 10M09: Older ibbu batteries display 65K capacity and are marked SOH bad LSIP200199335 (DFCT) 10M09: Request FW to not mark ibbu battery as bad when very high capacity is detected LSIP200196885 (DFCT) Batteries Not Charging LSIP200209376 (DFCT) HWR: 10M09: OEM requests ibbu i2c communication retries to be displayed in fw log LSIP200147629 (DFCT) (CL LSIP200167360) FW hit montask upon importing foreign config LSIP200147626 (DFCT) (CL LSIP200139418) System reboots after issuing OCR LSIP200147907 (DFCT) Disable Dimmer Switch III LSIP200151221 (DFCT) CLI/EFI CLI/PCLI fail to create a VD on MR LSIP200148150 (DFCT) WHQL WLK1.6 - SCSI Compliance Test 2.0 and Read Capacity 16 Unit FAILS on Liberator LSIP200184970 (DFCT) HWR: 10M09: not able to disable BGI with MegaCLI LSIP200173287 (DFCT) HWR: bbuMode is not in WebBIOS after flashing from 10M05 to 10M09 LSIP200186884 (DFCT) HWR: 10M09: DelaySOD is not working on customer Liberator boards LSIP200150532 (DFCT) (RW LSIP200145892) (6997086) (RW LSIP200121969) Liberator FW 10M09 cause system (sles11sp1/rhel6) reset while lspci -vvx LSIP200188226 (DFCT) HWR 10M09 can't sustain at least 950 MBps performance with Cache Flush setting 1 sec LSIP200200459 (DFCT) MegaCli prematurely returns exit 0x0 status on drive firmware flash LSIP200209349 (DFCT) Enable PCI capability Bit for VPD exsupport. LSIP200151328 (DFCT) HWR: EF & 10M09: bluescreen occurs handling R1 with HSP and medium errors LSIP200186966 (DFCT) HWR: 10M09: configuration becomes foreign after fw fails 3-4 attempts to access raid key during boot LSIP200147621 (DFCT) (CL LSIP200163913) performance issues within 9285 and 9280 caused by the MegaRAID FW LSIP200147632 (DFCT) (CL LSIP200173232) Potential data integrity issue found on R1 VDs while injecting the media errors under IO. LSIP200186406 (DFCT) Code Review defect to deliver rest of changes for PFK preboot support. LSIP200186594 (DFCT) R5 pfk feature not getting enabled at boot time on iMR LSIP200186595 (DFCT) After loading FoD key, iMR controller does not perform upgrade of features LSIP200188345 (DFCT) (CL LSIP200185468) HWR: 10M09: extended retries of write verify command causes driver timeout LSIP200171125 (DFCT) No event is generated when fan in enclosure fails LSIP200184943 (DFCT) Need ability to boot with pinned cache with any raid config on Gen 2 MegaRAID/Liberator defaulted to ON LSIP200185931 (DFCT) Bootwithpinnedcache not default set to '1' for castorlite when suboem is '1' LSIP200186584 (DFCT) Logical Unit ID (VPD page 0x83) changed after foreign import LSIP200198521 (DFCT) 10M09 P16 set properties command fails LSIP200146463 (DFCT) Update OOB (BMC) management LSIP200171812 (DFCT) Liberator Firmware : Fatal F/W Error* happened when detected drive error** during Read I/O. LSIP200169751 (DFCT) MegaRaid FW does not wait at post WebBIOS: ======== LSIP200199949 (CO) (LSIP200072140 WebBIOS for Liberator) SW licensing. Support FoD for PF activations on MegaRAID LSIP200188273 (DFCT) uEFI WebBIOS incorrectly displays "UG Spin Down" title LSIP200157087 (DFCT) EFI WebBIOS does not show product name/version for second adapter in adapter selection screen LSIP200121693 (DFCT) Unable to configure Cachecade in webBIOS under 10M09 for 2108 based products LSIP200166733 (DFCT) WEBBIOS is unable to reconstruct the R11 VD to R5 with removal of one PD. LSIP200147461 (DFCT) Cannot change the BBU properties in webbios LSIP200149524 (DFCT) WebBIOS gives garbled message when enabing FDE on an existing Disk Group BIOS: ======== LSIP200199602 FW hangs during POST after flashing new BIOS LSIP200196810 SWR-Macon: After installing the OS, unable to boot from SCU VD LSIP200187538 Oem controller displays JBOD during controller initialization in BIOS LSIP200185756 TB BIOS : It shows PD list during POST with specific OEM number which should not display PD list. LSIP200018807 BIOS sees extra characters "0%" at end of particular product name LSIP200171338: Handle iMR / MR entering Pre-Boot applications when mixed are present in the system NVDATA: ======= Numerous NVDATA changes Installation: ============= Use MegaCLI to flash the SAS controllers. MegaCLI can be downloaded from the support and download section of www.lsi.com. Command syntax: MegaCli -adpfwflash -f imr_fw.rom -a0 Component: ========= SAS MegaRAID Firmware Release for MegaRAID Controllers Release date: 04/15/2011 Version Numbers: =============== Current Firmware Package: 20.10.1-0037 Current Package Details: APP-2.120.54-1235_BB-2.02.00.00-0001_BIOS-4.24.00_4.11.05.00_0x05020000_WEBBIOS-4.0-45-e_33-Rel_PCLI-03.02-01500008_NVDATA-3.09.03-0018_2011_04_06 Previous Firmware Package: 20.10.1-0029 Previous Package Details: APP-2.120.24-1181_BB-2.02.00.00-0001_BIOS-4.21.00_4.11.05.00_0x05000000_WEBBIOS-4.0-44-e_32-Rel_PCLI-03.02-01500008_NVDATA-3.09.03-0011_2011_02_12 Bug Fixes and Enhancements: =========================== Firmware: ========= LSIP200167677 (CO) FW should issue STANDBY IMMEDIATE command to SATA disks during shutdown from OS LSIP200164222 (CO) Add mfc paramater that enables prints of topology changes in fw serial port output LSIP200158868 (DFCT) Power save mode hangs firmware causing driver to send kill adpter command LSIP200145892 (DFCT) Liberator FW 10M09 cause system (sles11sp1/rhel6) reset while lspci -vvxxx is used LSIP200153454 (DFCT) Firmware Incompleted Writes During Power Fail and Recovery LSIP200125226 (DFCT) Red LED is lit on the next empty slot in an specific JBOD if the empy slot is immediatly after an array member LSIP200153500 (DFCT) 9280-4i4e unable to import a Foreign Configuration LSIP200166039 (DFCT) Label of Virtual Disk not provided by Drive Identify Command LSIP200164210 (DFCT) Enable/disable of HDD cache doesn't appear to work LSIP200167654 (DFCT) Potential data mismatch found when rebuild is progressing on R1 VD with media error under IO. LSIP200166899 (DFCT) HWR: Fw log should indicate if a created/existing VD is already initialized LSIP200157150 (DFCT) The new event can't be logged. LSIP200156699 (DFCT) MegaCli -AdpAllInfo shows BBU is not supported for Castor cards LSIP200153318 (DFCT) FW doesn’t detect the iBBU08 if it is remotely mounting with OEM controller LSIP200146481 (DFCT) SMART predictive failure detection takes longer in 10M09 than 10M06 LSIP200146484 (DFCT) MR FW reports "Unexpected sense, Invalid field in CDB" for LOG SENSE command sent to Seagate drives WebBIOS: ======== LSIP200156291 (DFCT) can't create DG with 8 PDs with enableReducedFeatureSet LSIP200139977 (DFCT) Option for populating the VD size field automatically BIOS: ======== LSIP200139406 (DFCT) 3 9260/80 controllers cant boot from MR LD with post 10M09 12.12.0-0036 - works with 10M08 12.11.0-0016 LSIP200152136 (DFCT) Attempting to load WebBIOS causes some systems to hang LSIP200153080 (DFCT) Windows and Linux won't boot using FW 1190 with BIOS 16 LSIP200142244 (DFCT) System halts in the post after starting VD and PD erase operation and rebooting the system. LSIP200156493 (DFCT) There is no space between FW version and capacity in the table where Adp/VD/PD info is displayed Installation: ============= Use MegaCLI to flash the SAS controllers. MegaCLI can be downloaded from the support and download section of www.lsi.com. Command syntax: MegaCli -adpfwflash -f imr_fw.rom -a0