|
SandForce SF-1200 - First-generation Flash Storage Processor (FSP) with enterprise-class features for cost-sensitive client environments
- LSI DuraClass technology provides best-in-class endurance, performance, and low power
- Best-in-class, consistent read and write performance (up to 260 MB/s, 10 K IOPS) for client applications
|
|
Product Banner
|
Product Features / Benefits Solid state drives (SSDs) are being widely deployed in client computing platforms over hard disk drives (HDDs) for their ability to optimize for durability, boot time, application performance and responsiveness, and power savings. TheLSI® SandForce®SF-1200 Flash Storage Processors (FSPs) are revolutionary SoCs designed specifically to maximizethese SSD benefits with enhanced enterprise-class reliability, performance, and security in-cost and power-sensitivemobile computing environments. Features
- 3 Gb/s SATA v2.6 with NCQ support
- High integration supports up to 512 GB* on a 2.5"" or 1.8” drive
- Best-in-class, consistent read and write performance (up to 260 MB/s, 10 K IOPS) for client applications
- LSI DuraClass™ technology provides best-in-class endurance, performance, and low power
- LSI DuraWrite™ architecture extends the endurance of MLC memory providing at least 5 year lifecycles w/ 3-5 K cycle MLC Flash
- Optimized, single-chip eliminates need for external memory, saving on cost, power, and space
- Power balancing optimizes energy consumption (number of active flash devices) vs. performance
- Ultra-low power mode to maximize battery life
- RAISE™ provides RAID-like protection for single SSD client systems
- Highly intelligent block management and wear leveling optimizes SSD longevity
- Automatic encryption (AES-128) and password at the drive level ensures secure data protection
Benefits
- Enhanced enterprise-class reliability, performance, and security in cost- and power-sensitive client computing environments
- Extended endurance and maximized write performance for the life of the SSD
- Extra level of data security through encryption and optional disk-level password
- Maximizes battery life with ultra-low power modes
- RAID-like data protection and reliability a single drive without the 2x write overhead of parity
*1GB = 1 billion bytes
Product Specifications
|
|
| LSI DuraClass™ Technology |
- LSI DuraWrite™ architecture extends the endurance of SSDs
- Intelligent block management and wear leveling
- Intelligent read disturb management
- Intelligent “recycling” for advanced free space management
- RAISE™ (Redundant Array of Independent Silicon Elements)
- Intelligent data retention optimization
- Best-in-class ECC protection for longest data retention and drive life
- Power/Performance balancing
|
| Host Interface |
- SATA 2.6 compliant, 3 Gb/s, and 1.5 Gb/s support
- Native command queuing (up to 32 commands)
- SMART command transport (basic)
|
| Max Capacity Supported |
- 512 GB* (using 32 Gb/die components)
|
| Performance |
- Sequential read transfer: Up to 260 MB/s (@ 128 K blocks)
- Sequential write transfer: Up to 260 MB/s (@ 128 K blocks)
- Random read IOPS: 30,000 (@ 4 K blocks)
- Random write IOPS: 30,000 burst/10,000 sustained (@ 4 K blocks)
- PCMark05: 40,000 (HDD test suite score)
- PCMark Vantage: 43,000 (HDD test suite score)
|
| Flash Memory Support |
- MLC from numerous top flash memory manufacturers
- SLC up to 64 GB* of total capacity
|
| Power Consumption |
- Typical: 900 mW
- Sleep/Slumber: 90 mW
|
| Security |
- Data encryption: 128-bit AES
- Optional disk password
|
| Protection |
- ECC recovery: Up to 24 bytes correctable per 512-byte sector
- Unrecoverable read errors: Less than 1 sector per 1016 bits read
|
| Reliability |
- MTTF: 2,000,000 operating hours
- Supports 5-year consumer life cycle
|
| Operating Temperature |
|
| Package |
- 361-pin TFBGA – 13 x 13 mm, 0.65 mm pitch
|
| Compliance |
- RoHS, Halogen-Free, Green
|
*1GB = 1 billion bytes
>>
Expand
Product Brief (1)
>> Expand
SandForce SF-1200 Product Brief
The LSI® SandForce® SF-1000 Reference Designs and Evaluation SSDs bring today’s critical enterprise and client storage needs — performance, reliability, and price — together in one package like never before. Using the LSI SandForce SF-1000 Flash Storage Processor (FSP) family, the reference designs leverage the exclusive LSI DuraClass™ technology to achieve industry-leading performance from all types of flash memory, giving drive manufacturers the flexibility to minimize costs without compromising performance or reliability.
Size: 0.64M
Language: English
|
Aug 10, 2012 |
 |
|
|
|
|
>>
Expand
If you purchased an SSD with an embedded SandForce Flash Storage Processor, please contact the manufacturer of your particular SSD for any questions about firmware upgrades, software tools, features, compatibility, etc. LSI supplies SandForce Flash Storage Processors to many manufacturers for various applications, and is unable to answer questions about SSDs not produced by LSI.
LSI SandForce Support Update
|
|
LSI solid-state storage products are designed from the ground up for Web 2.0 applications, financial transactions, video production, and databases.
|
|
|
|
|