Hardware Quick Guide:  LSI Logic MegaRAID® SCSI 320-1 Controller Quick Hardware Setup Guide
Jun.29.04 (PDF 74.22 KB)
This quick hardware setup guide describes the steps involved in installing the MegaRAID SCSI 320-1 Controller. It includes jumper settings, installation diagrams, configuration instructions, and references to more detailed documentation. The MegaRAID SCSI 320-1 Controller enables connection of Ultra320 SCSI drives, in RAID configurations, to computer systems with a PCI slot.
Product Brief: 3201battery Product Brief
Dec.31.07 (PDF 101.56 KB)
With support for 64-bit addressing and a full RAID feature set, the
MegaRAID SCSI 320-1 delivers unsurpassed data through put and fault
tolerance for your mid-range server or performance workstation. Quick
installation and setup capabilities along with easy-to-use management utilities
make the MegaRAID SCSI 320-1 the first choice of OEMs, system integrators
and value added resellers (VARs) worldwide.
MegaRAID SCSI 320-1 Product Brief
Nov.01.03 (PDF 855.25 KB)
Low profile (MD2 form factor), single-channel Ultra320 SCSI RAID solution for entry-level servers and performance workstations.
MegaRAID SCSI 320-1LP product brief
Oct.01.03 (PDF 101.56 KB)
form factor MegaRAID® SCSI 320-1LP PCI SCSI RAID adapter allows OEMs and system integrators to vertically mount a RAID card into 2U rack chassis.
Product Guide: Storage Adapter Product Selector Guide
Oct.09.09 (PDF 340.73 KB)
User Guide: Installation des pilotes de périphériques MegaRAID® Guide d'Utilisation - French
May.10.06 (PDF 290.09 KB)
This manual is the primary reference for the operating system drivers provided with the LSI Logic MegaRAID® devices. It describes the drivers for all supported operating systems and explains how to install them. The controller can run under MS-DOS or any DOS-compatible operating system using the standard AT BIOS INT 13h hard disk drive interface. To use the controller with other operating systems, you must install software drivers. Driver files for supported operating systems are available on the Universal Driver Suite CD that accompanied your MegaRAID controller. LSI Logic updates the drivers frequently. To ensure you have the current version of this driver, download the driver from the LSI Logic web site: http://www.lsilogic.com.
MegaRAID 320 Storage Adapters UG
Jun.29.08 (PDF 5.01 MB)
This guide is the primary reference and user's guide for the LSI Logic MegaRAID® 320 SCSI storage adapters. It contains complete installation instructions for these adapters and includes specifications for them.
The MegaRAID 320 SCSI RAID storage adapters are high-performance intelligent PCI-to-SCSI adapters with RAID control capabilities. MegaRAID 320 RAID storage adapters provide reliability, high performance, and fault-tolerant disk subsystem management. They are an ideal RAID solution for the internal storage of workgroup, departmental, and enterprise systems. MegaRAID 320 RAID storage adapters offer a cost-effective way to implement RAID in a server and are available in one, two, or four channels.
MegaRAID Configuration SW UG
Mar.23.06 (PDF 1.42 MB) Updated
This guide is the primary reference and user's guide for the LSI Logic MegaRAID® software tools and utilities. These include the MegaRAID BIOS Configuration Utility, MegaRAID Manager, WebBIOS Configuration Utility, and Power Console Plus, which enable configuration and management of RAID systems on MegaRAID controllers.
MegaRAID SNMP Configuration SW UG
Feb.01.03 (PDF 153.03 KB)
The MegaRAID SNMP Configuration Software Guide describes the MegaRAID SNMP-based management application, which monitors and manages devices through SNMP extension agents. The MegaRAID SNMP subagent reports the information about the RAID adapter, logical drives, physical drives, and enclosures. The SNMP extension agent sends out SNMP traps that depend on the notification from the firmware.
MegaRAID®-Gerätetreiber-Installation Benutzerhandbuch - German
May.10.06 (PDF 292.17 KB)
This manual is the primary reference for the operating system drivers provided with the LSI Logic MegaRAID® devices. It describes the drivers for all supported operating systems and explains how to install them. The controller can run under MS-DOS or any DOS-compatible operating system using the standard AT BIOS INT 13h hard disk drive interface. To use the controller with other operating systems, you must install software drivers. Driver files for supported operating systems are available on the Universal Driver Suite CD that accompanied your MegaRAID controller. LSI Logic updates the drivers frequently. To ensure you have the current version of this driver, download the driver from the LSI Logic web site: http://www.lsilogic.com.
| 
News Releases